NefMoto

I'm a newbie and looking for definition files for my addiction. I have a few matching reads via mpps clone. Not sure how to FF the VIN with OLS v1.234 so I can post. Or for that matter is it really even necessary.

My baby is un modified, except for the Forge Split-R from the previous owner. It will not stop tripping - Pressure Drop between Turbo and Throttle Valve (check D.V.!) unless it is adjusted to 43 clicks CW from all the way CCW. Since it seems to be code free and has more power, I can live with it and just want to spend a while reading and locating maps if someone can spare the help.

FWIW Example: I've located the LDRPID at 1ECD6 but my X and Y values seem to be incorrect and I'm not sure how they are derived. I am comparing to a 8N0906018CB and everything matches bin for bin unitl I get a little past 64k/10000. From there, the maps can be identified but are shifted.

I can try the nefmoto software if it will work with a ebay vag com 10.6.0 cable, the obd end of the cable says VAG106 if it helps.....

8N1920980A is instrument cluster mate ... not engine ecu ;)

Why and where do you need to FF vin?

Oops, a little too much beer the night I made my spreadsheet, 8N0 906 018 CJ.
Does everyone else FF the VIN of their car when they post?

Okay,

Definition File: 8N0906018CB
           My TT: 8N0906018CJ

I'd say I'm pretty close... Not sure why it is not an exact match but I'm good.

Cheers  ;D

Out of interest, did you use MPPS with ECU in car, and was it boot mode?

what did you adjust 43 clicks cw to ccw?? i get the same code

The op has an adjustable dv valve . You can turn it to increase/ decrease opening vacuum . The clicks are just a measure of resistance on the valve.

post the ori here if you want map.

Can you do anything neurotuning? Thanks!

This file shares a def. with 032RN.

Thanks for the tip, but I don't have much defined with that version either. Getting there, though. I would also like having something to verify what I've been defining thus far.

Is the y-axis for RN and CJ the same in all respects for LAMFA? I get this when transferring values from a partial xdf  smelly240 posted. It displays correctly within his xdf.

Edit. I figured out I had two maps defined within the same space.. :/ Fixed

Scanning for C:\Documents and Settings\Administrateur\Bureau\04' TT 225 BEA 8N0906018CJ_0001_0261208270_367512.bin

MAP FOUND: KFZWOP 11x16 @ 0x11580
MAP FOUND: KFZWOP2 11x16 @ 0x11630
MAP FOUND: KFZW 12x16 @ 0x1211B
MAP FOUND: KFZW2 12x16 @ 0x121DB
MAP FOUND: KFMIRL 16x16 @ 0x151A6
MAP FOUND: KFMIOP 11x16 @ 0x16894
MAP FOUND: KFLBTS 16x12 @ 0x1935C
MAP FOUND: LAMFA 6x15 @ 0x1D1AE
MAP FOUND: KFLDIMX 8x16 @ 0x18478
MAP FOUND: KFLDHBN 8x8 @ 0x1F3DA
MAP FOUND: KFDLULS 8x8 @ 0x1A61A
MAP FOUND: KFLDRL 10x16 @ 0x1EE28
MAP FOUND: LDRXN 16x1 @ 0x1F70C
MAP FOUND: LDRXNZK 16x1 @ 0x1F74E
MAP FOUND: VMAXNB 1x1 @ 0x1FAE2
MAP FOUND: VNMX 1x1 @ 0x116F1
MAP FOUND: NMAXGA 1x8 @ 0x1FAD0
MAP FOUND: NMAXOG 1x1 @ 0x16A20
MAP FOUND: DNMAXH 1x1 @ 0x16A12
MAP FOUND: ITNMXH 1x1 @ 0x16A16
MAP FOUND: TMOTNMX 1x1 @ 0x1FAE0
MAP FOUND: TNMXH 1x1 @ 0x16A24
MAP FOUND: CWDLSAHK 1x1 @ 0x181BC
MAP FOUND: CDHSH 1x1 @ 0x1819E
MAP FOUND: CDHSHE 1x1 @ 0x1819F
MAP FOUND: CDHSHE 1x1 @ 0x1819F
MAP FOUND: CDLSH 1x1 @ 0x181AB
MAP FOUND: CDSLS 1x1 @ 0x181B0
MAP FOUND: CLAHSH 1x1 @ 0x107A2
MAP FOUND: CLAHSH2 1x1 @ 0x107A3
MAP FOUND: CLAHSHE 1x1 @ 0x107A4
MAP FOUND: CLAHSHE 1x1 @ 0x107A4
MAP FOUND: CLASLPE 1x1 @ 0x107D6
MAP FOUND: CLASLVE 1x1 @ 0x107D9
MAP FOUND: CLASLVE 1x1 @ 0x107DC
MAP FOUND: KRKTE 1x1 @ 0x1CF96

Thanks!