|
Title: [SKOLS] French NooB.... Post by: SKOLS on April 09, 2015, 09:11:43 AM Hi, everybody.....
First of all, i apologize for my poor english, and i hope my understanding will not make crazy the Nefmoto member's.... ;D For a long time, i work on TDI engine, but i recently bought a S3 8P 2007 BHZ, to my greatest pleasure. Although I know nothing of MED9, I really want to learn and I have tones of questions. I hope you can help me, other the steps... BR SKOLS Title: Re: [SKOLS] French NooB.... Post by: SKOLS on April 09, 2015, 09:17:15 AM First question:
Must i create my MED9 thread in Noob or Tuning zone? BR Title: Re: [SKOLS] French NooB.... Post by: ddillenger on April 09, 2015, 10:13:34 AM First question: Must i create my MED9 thread in Noob or Tuning zone? BR At this point, you should read before creating a thread. 95 percent of your questions have been asked and answered. If you can't find answers, and they are basic questions, noobzone it. Welcome. Title: Re: [SKOLS] French NooB.... Post by: SKOLS on April 09, 2015, 11:06:32 AM At this point, you should read before creating a thread. 95 percent of your questions have been asked and answered. If you can't find answers, and they are basic questions, noobzone it. Welcome. Thank's for answer boss.... In fact, i don't want to make a "question" thread, but rather a developpement thread for ST2 goal, step by step (ST1, ST1+, ST2...)....perhaps it's too early for that, effectivly. Also, i plan to migrate our "Control panel" to MED9, so it could be interesting to had your help ( https://youtu.be/vj1QaD8p9HI )....at the moment, it work on EDC15/ME7 Kline platform, but i would like to make it work on RNS-E.... For now, most of my questions concern Nefmoto tools, like ECUxplot, WinLOG....etc.... This said, you're right, i'll follow your advice, and read Noob section to find the answer's.... Thank's. SKOLS |