|
Title: Error 18058 when flashing M File in D Box Post by: Chris1982 on April 10, 2015, 12:04:53 PM Hey Guys!
I tried flashing the M Box File in my D Box! I Read the fault Codes and had Error 18058 No Communication to dash Board. So I can't Start my car because of the Immo! What should I do now? Any ideas? Title: Re: Error 18058 Ehen flashing M File in D Box Post by: nyet on April 10, 2015, 12:45:11 PM M-box has no immo. It shouldn't care.
If you have missing message error: http://s4wiki.com/wiki/Tuning#Missing_Message_from_Instrument_Cluster Title: Re: Post by: Chris1982 on April 10, 2015, 01:10:58 PM M-Box has no Immo? Ok, so i should turn it off in the dash board with VAG Dashcan, or not? Because engine is starting, turns oft after a second and the key icon is flashing...
Title: Re: Error 18058 when flashing M File in D Box Post by: nyet on April 10, 2015, 01:22:06 PM You'll have to flash your cluster with a non-immo eeprom probably
You may also have to get an mbox eeprom for your ecu Either way, make backups of both! Title: Re: Error 18058 when flashing M File in D Box Post by: ddillenger on April 10, 2015, 03:08:52 PM Hey Guys! I tried flashing the M Box File in my D Box! I Read the fault Codes and had Error 18058 No Communication to dash Board. So I can't Start my car because of the Immo! What should I do now? Any ideas? If you flashed an M-box, the car would start. |