|
Title: 24C02 readers/writers Post by: dik-van-dub on April 12, 2015, 12:12:10 PM what would you guys use to read and write to 24C02 chips on me3.8 ecu's
i have seen a few option but wanted to know peeps prefered choice Title: Re: 24C02 readers/writers Post by: ddillenger on April 12, 2015, 04:46:26 PM GQ4x
Title: Re: 24C02 readers/writers Post by: slappynuts on September 07, 2015, 01:18:59 PM So what is the trick to gettiGQ4x to read this thing. Mine acts like it is reading but never actually reads.
Title: Re: 24C02 readers/writers Post by: eliotroyano on September 08, 2015, 08:35:16 AM GQ4x Me too, but basically any small and cheap eeprom reader should read/write easily. ICSP (in circuit serial programming) is other story. Title: Re: 24C02 readers/writers Post by: ddillenger on September 08, 2015, 08:41:35 AM Sometimes you just have to desolder. It happens.
Title: Re: 24C02 readers/writers Post by: eliotroyano on September 08, 2015, 08:42:56 AM Sometimes you just have to desolder. It happens. I would say 99% of the time ;D ;D ;D ;D ;D ;D. In circuit those eeproms are really tricky. |