|
Title: me7.5 eeprom swap car wont start Post by: modchip on April 12, 2015, 02:42:56 PM hi all
i m new in the ecu prog but i have a little knoweledage about electronics so my freind s car A4 2001 1.8T have a ecu fault want start ( there is fuel from injector but no spark ) i baught other ecu and test it without modification the car start but for one second and stop and so i think it is the immo prob i decide to desolder the 95040 from his ecu me7.5 and solder it in the new one and when i test the car crank but dont start even that one second and the diag say ecu locked should i keep the eeprom of the new ecu and just change the skc and the vin number Or what i should do please help Title: Re: me7.5 eeprom swap car wont start Post by: _nameless on April 12, 2015, 06:20:10 PM hi all http://nefariousmotorsports.com/forum/index.php?topic=3319.0title=i m new in the ecu prog but i have a little knoweledage about electronics so my freind s car A4 2001 1.8T have a ecu fault want start ( there is fuel from injector but no spark ) i baught other ecu and test it without modification the car start but for one second and stop and so i think it is the immo prob i decide to desolder the 95040 from his ecu me7.5 and solder it in the new one and when i test the car crank but dont start even that one second and the diag say ecu locked should i keep the eeprom of the new ecu and just change the skc and the vin number Or what i should do please help write this to thr eeprom and call it a day use argdubs eeprom flash tool so you dont have to remove the chip again Title: Re: me7.5 eeprom swap car wont start Post by: modchip on April 13, 2015, 04:50:53 AM thank s i will try and tell you
|