|
Title: A8 D3 2004 cluster dead Post by: boldman on April 22, 2015, 03:27:08 AM My cluster from A8L is dead, fuse blow. Car start but after 1-2 seconds it dies. Immo kicks in.
I bought other used cluster and question is if I can swap the eeproms from dead cluster to the other cluster and the component protection does not need to removed by the dealer ? which cost 100 euro normaly. I found this Eeprom on the cluster print circuit, see pic below. maybe I must swap behind the board a little chip ? I have equipment to do it. (http://www.nifatrading.be/a8eprom.jpg) Title: A8 D3 2004 cluster dead Post by: boldman on April 22, 2015, 03:30:17 AM My cluster from A8L is dead, fuse blow. Car start but after 1-2 seconds it dies. Immo kicks in.
I bought other used cluster and question is if I can swap the eeproms from dead cluster to the other cluster and the component protection does not need to removed by the dealer ? which cost 100 euro normaly. I found this Eeprom on the cluster print circuit, see pic below. maybe I must swap behind the board a little chip ? I have equipment to do it. (http://www.nifatrading.be/a8eprom.jpg) |