|
Title: Golf MK5 R32 2006 ME7.1.1G Post by: R32VAG on April 27, 2015, 04:30:10 AM Hello,
i want to flash my Golf 5 R32 BUB. 022906032CE How can i flash it safe? I ordered a MPPS V16 and Can+Commander 3.6 an 5.5 cable. Can anyone help me? Title: Re: Golf MK5 R32 2006 ME7.1.1G Post by: Frankenstein86 on May 07, 2015, 03:38:54 AM MPPS clone isn't good with this ecu you will brick it.
Use Boot Mode or desolder it. Title: Re: Golf MK5 R32 2006 ME7.1.1G Post by: Lionborg on May 08, 2015, 10:35:32 AM Hello, Im not sure this will actually help, but i have no problem reading/writing my Golf 4 R32 ME7.1.1 022906032CP with Nefmoto and a FT232R cable. Dont know if the mk5 uses a different ECU though.i want to flash my Golf 5 R32 BUB. 022906032CE How can i flash it safe? I ordered a MPPS V16 and Can+Commander 3.6 an 5.5 cable. Can anyone help me? Title: Re: Golf MK5 R32 2006 ME7.1.1G Post by: Mikhail on June 08, 2015, 04:08:25 AM I have same problem, would like to read and flash a3 3.2 022906032CB ME7.1.1G. What would be good tools to this?
Title: Re: Golf MK5 R32 2006 ME7.1.1G Post by: vwaudiguy on June 08, 2015, 11:21:19 AM MPPS clone isn't good with this ecu you will brick it. Use Boot Mode or desolder it. Which version of clone are you referring to? Also bootmode, or desoldering does not get you the information stored in the microprocessor to my understanding, which is sometimes needed. I've read that ver 16 MPPS should achieve this, but the cable hasn't arrived yet. Title: Re: Golf MK5 R32 2006 ME7.1.1G Post by: Jim_Coupe on July 19, 2015, 02:58:53 AM Itressting.. I Also need some info about this.. I have an Audi TT 3.2 BUB.. Anything new on this next version of Me7.1.1 ?
I have acsess to a Original KESS v2. Does that work? |