NefMoto

So in my attempt to fix partial throttle surge after installing a larger (76mm) throttle body and a higher tension wastegate spring, I have tracked down the following:

KFVPDKSE
KFMSNWDKVP
KFXDKMSNVP

These are all included in the attached 115G mappack, but I need help finding:

KFVPDKSD

I have been looking for a while, but I can't seem to track it down. Any help is appreciated.
Eric

OK, found it. Also I corrected the IRL/IOP maps as they were not correct, and added a couple others I found when I was comparing with a Seat Leon 115H file to find the KFVPDKSD map.

New mappack attached.

Eric

Nevermind, I found KFVPDKLD and not KFVPDKSD. So I still am looking for the "SD" map.

Eric

I don't think ME9 uses the dynamic map. I have checked 3 mappacks and associated ori files for 3 different versions of ME9.1 and none of them have the KFVPDKSD defined in them. Maybe ME9 uses a separate axis or a scaler to interpret the SE map?

Eric

I just searched the ME9.1 Funktionsrahmen and KFVPDKSD does not show up anywhere in the document.

EPY

Seriously not a single one of you Motronic brainchildren have a single hint? Oh the humanity!

epy

English Version Attached.

Have found a simple way to translate...

Export Maps as csv from winols for newer versions

Import above sheet into google sheets and run the google translate function

Export as csv.

Open in notepad and find and replace , with ;

Reimport into winols.

Cool. Thanks!

EPY

cool !Thanks!