|
Title: Wrong axis on KFVPDKSE Post by: ericpaulyoung on April 30, 2015, 02:48:01 AM Reading up on how to adjust KFVPDKSE, I note that there is a pressure ratio on the x-axis, but my definition has a less than 1 decimal value. Does the ME9 handle this map differently from ME7?
Here is an ME7 map, notice the axis opposite the rpms varies from 1.065 - 1.60, but in my map it varies from (http://nefariousmotorsports.com/forum/index.php?action=dlattach;topic=4489.0;attach=7100;image) And here is my map, with the non-rpm axis not matching the format of the ME7 example above. (http://i1073.photobucket.com/albums/w381/ericpaulyoung/KFVPDKSE_zpsaxbvsuzs.jpg) Title: Re: Wrong axis on KFVPDKSE Post by: dream3R on May 02, 2015, 09:12:12 AM In the ME9 code I have seen it is handled the same, check out the MED9 FR too :)
Title: Re: Wrong axis on KFVPDKSE Post by: ericpaulyoung on May 04, 2015, 03:59:55 AM That is good news. However, I looked at the MED9 FR, and the only funny thing I noted is that I don't think ME9 uses the dynamic map. I still need to compare to ME7 FR and see if it is defined differently.
Also, I checked 3 different mappacks and associated ori files for 3 different versions of ME9.1 and none of them have the KFVPDKSD defined in them. So I am thniking that maybe ME9 uses a separate axis or a scaler to interpret the SE map, and also causes the axis to be different? In each of the 3 mappacks I checked, all had axis values which are all less then 1. |