|
Title: 2001 Allroad cluster 01177 error Post by: metronet on May 02, 2015, 07:46:46 PM I am getting the following fault code after switching CLK/DATA to CAN H/L on my Cluster. Not experiencing any issues but I am really interested to know "why" I am getting this code, and how to get rid of it. Code: Control Module Part Number: 4Z7 920 930 D 2001 Allroad Tiptronic running stock L-box (no immobilizer). Instrument Cluster channel 62 is re-coded to display information from RNS-E. Everything works fine, just this warning code. Any thoughts? Title: Re: 2001 Allroad cluster 01177 error Post by: ddillenger on May 03, 2015, 12:08:19 PM Adaptations, channel 060. What's it say there?
Title: Re: 2001 Allroad cluster 01177 error Post by: metronet on May 03, 2015, 07:00:30 PM Channel 060 is set to 3075 Code: +0001 engine The other thing I noticed is when RNS-E power (or battery) is unplugged and after entering the security code successfully it jumps right back to PIN entry mode. It would sync with the cluster eventually after a few trips. I know the cluster is talking to the RNS-E correctly via Can because I get the in-dash road guidance and the screen is off when ignition off. The ECU (8D0907551L) does not have any fault codes. |