|
Title: med17 Post by: ktm733 on May 07, 2015, 01:21:07 PM So I made a bootmode or bench mode for med9, will the harness work for edc17? also I'm looking at ecd harness and they connect wires to some pins. can someone help me.
A little info: I have a harness cut from a car and wired so I can use ob2 obviousl doesn't work till immo is deleted I also have bdm100 pins set up for med9< will med9 pogo pins be the same for med17? Title: Re: med17 Post by: salex on May 07, 2015, 01:46:36 PM So I made a bootmode or bench mode for med9, will the harness work for edc17? also I'm looking at ecd harness and they connect wires to some pins. can someone help me. A little info: I have a harness cut from a car and wired so I can use ob2 obviousl doesn't work till immo is deleted I also have bdm100 pins set up for med9< will med9 pogo pins be the same for med17? Please slow down before I get a heart attack. MED9 is MPC555/556 - Motorola, therefore there is no bootmode. Only BDM access. So no harness needed for that. MED17/EDC17 is Tricore - Infineon, and you need boot mode. There is NO BDM access for MED17 because there is no such connection for tricore MCU's. What exactly are you trying to do with your harness? And how immo is involved in all of this, is really beyond me. Title: Re: med17 Post by: ktm733 on May 07, 2015, 01:54:03 PM Ok sorry, ok ill start with how immo is involved in this, you cant flash med through say bench harness because immo.
Next edc17, what do i need to have a bench harness work on this, or is there no such thong? When i say bench harness i'm talking about the picture i'll upload. Can i bdm edc17 also? Last but not least med17, what can i use to read flash? Title: Re: med17 Post by: ktm733 on May 08, 2015, 06:45:31 AM ??? anybody have just a tad info for me??
Title: Re: med17 Post by: flaattire on May 11, 2015, 10:34:02 AM To bench flash MED17 you may have to pop the case and add some resistors to the ecu pcb. It's all in the manual for whatever cable you're using, clone or not.
Title: Re: med17 Post by: ktm733 on May 25, 2015, 01:20:49 PM i bought galleto4 now i'm waiting on ecu to get here. So the testing will soon begin. though the galleto cd i got isnt working?
Title: Re: med17 Post by: ddillenger on May 25, 2015, 01:47:46 PM Clones+new ecus=heartbreak
Just be prepared with full backups, and realize that due to the OTP sectors on these ecus, they can't just be cloned, immobilizer can't just be transferred, and recovery isn't always a simple task. Title: Re: med17 Post by: ktm733 on May 31, 2015, 07:21:28 AM will be taking full back up and going from there. What's this password thing on the med17?
Title: Re: med17 Post by: flaattire on June 01, 2015, 09:30:34 PM The "password thing" on MED17 wasn't defeatable with my clone Galletto 4. I wouldn't even try, personally, unless you're OK bricking the ECU.
Title: Re: med17 Post by: ktm733 on June 02, 2015, 02:49:49 PM I got it to work!!! Read the file then flashed it back on. Bad news though.. Its a flippen apr tune!!
|