|
Title: Access Touran Cluster: Problems with VAG Tacho etc. Post by: Qnkel on May 17, 2015, 01:11:58 AM Hello,
I'm desperated. I want to change the cluster in my 2004 touran. I have a china vcds 12.12 (firmware 1.92), a china vcds 10.6 (firmware 1.84) and a china vag tacho 5.0 usb with k+can. I tried vag tacho 5.0. It connects to the cluster but says "Wrong seed-key! Try manual mode for VDO". But when i try manual mode, it doesn't matter what i choose, an error occur "is not a valid integer". I think it is a bug in the cracked vag tacho. (see screenshot) Vag Tacho connects over CAN-TP2.0. I downloaded many versions of vag tacho but no other recognize my vag tacho cable - only the version that cames with the cable. Now i tried to install the virtual com port for the vag tacho cable and try vag k+can commander 1.4, 3.0, 3.6 and 5.5 - no one connects. Can anyone help me with vag tacho or how another software is usable? I want to change the cluster, learn my old keys on it and change the mileage. Thank you very much! Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: k0mpresd on May 17, 2015, 01:21:33 AM buy genuine VT and get support from developer, if theres still an issue. he is always happy to help. problem solved.
Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: Qnkel on May 17, 2015, 02:28:14 AM Thanks for the advise. I hoped that i can use the vt-cable for another tool to get on my cluster or the eeprom.
I already checked the original manufactor. I tought that vag tacho is a really china tool and not a clone, i'm sorry. I knew only VAGdashCAN before. Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: k0mpresd on May 17, 2015, 02:33:30 AM genuine VT straight from developer. cost is very reasonable as well and loads better than that chinese scrap. :)
http://opelinfo.com Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: H2Deetoo on May 18, 2015, 04:14:38 AM What partnr is your cluster?
What eeprom is used, and what cpu is used? Rgs H2Deetoo Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: Qnkel on May 22, 2015, 09:49:46 AM Partnr is 1T0 920 870 F
EEPROM and CPU unknown... haven't it opened yet. Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: H2Deetoo on May 26, 2015, 06:36:22 AM Could you also tell cpu and eeprom type?
Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: Qnkel on May 27, 2015, 12:50:09 PM I disassembled it and checked:
CPU: Micronas CDC 3297G EEPROM: 24C16 Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: ocostel on June 20, 2015, 10:15:04 AM Hi,
Did you solve the problem with Vag Tacho ? I'm in the same situation ! Title: Re: Access Touran Cluster: Problems with VAG Tacho etc. Post by: H2Deetoo on June 23, 2015, 03:24:14 AM The Vagtacho 5.0 China clone doesn't support this Micronas mcu :(
|