|
Title: Audi AJL with ME7.5 and VVT Post by: -ww- on June 01, 2015, 09:10:50 AM Hi. Audi B5Q AJL engine, h-rods, ext. wastegate, 56/57, fmic, VVT, Deka 80lb/hr, NA-cams, OEM me7.5 MAF etc.
Ecu Passat AWM 4B0906018CL Need some advice with tune maps. Ecu Passat AWM 4B0906018CL Immo off, scaled injectors, works fine. (Running like factory setup) Cold start is little waving/rough and sometimes when press clutch pedal (hot engine), -> dead. Tried to adjust KFMIRL KRMIOP LDRXN, worked for part throttle but WOT is same as part throttle, not mentioned difference. Max boost is still 0.7-0.8bar. Tested without wastegate, boost 1.5bar so i think ecu is guilty. Using Tunerpro and this XDF. -> http://nefariousmotorsports.com/forum/index.php?topic=7378.0title= (http://nefariousmotorsports.com/forum/index.php?topic=7378.0title=) Sometimes it giving faultcode from low boost pressure / leak. Leaks are checked ok. Im a rookie with motronic, thanks in advance if someone wants to help me :) Title: Re: Audi AJL with ME7.5 and VVT Post by: nyet on June 01, 2015, 10:31:28 AM Please post logs
Title: Re: Audi AJL with ME7.5 and VVT Post by: -ww- on June 01, 2015, 10:36:24 AM Please post logs How to? :D Nefmoto flasher logger? MPPS cable? Blue KKL cable? I have tuned only Megasquirt and Vems so far, Motronic is hebrew :) Title: Re: Audi AJL with ME7.5 and VVT Post by: nyet on June 01, 2015, 10:50:04 AM ME7L.
I'm assuming you read the Tuning page linked below.. should I make the logging instructions more prominent? Also see the (lone) sticky in this thread http://nefariousmotorsports.com/forum/index.php?board=37.0 |