Title: ME7Logger problems
Post by: golfputtputt on June 05, 2015, 08:03:26 AM
I've been trying to get ME7logger working for quite some time now and have been getting huge amounts of problems. First, I got that the ftd2xx library cannot be located. I installed the VCDS VCP for my interface and I wasn't really sure what the hell I was doing. I called VCDS and they said they havent updated that driver in 7 years! They also havent delt with any technical support with it so they had no idea what to do for me. I installed the VCP driver using the download off their site and their instructions. I used the FTDI port setup information (not the FTDI bus information) from the folder downloaded, should I have used the Bus? The FTD2xx error went away and now I am getting this after the install: -> Reading log config file C:\Users\Gperman\Desktop\ME7Logger_DIST_10072013_v1.2
0\logs\stock unmodified copy_template.cfg .... done
-> Reading ecu characteristics file C:\Users\Gperman\Desktop\ME7Logger_DIST_1007
2013_v1.20\ecus\stock unmodified copy.ecu .... done
Used Ecu definition is:
[Communication]
Connect = SLOW-0x11
Communicate = HM0
LogSpeed = 56000
[Identification]
HWNumber = "0261207446"
SWNumber = "1037363354"
PartNumber = "06A906032HS"
SWVersion = "0008"
EngineId = "1.8L R4/5VT"
Logged variables are:
#no.: name , alias , addr ,sz, bitm, S
, I, A , B, unit
#-------------------------------------------------------------------------------
-----------------------------
#001: dwkrz_0 , IgnitionRetardCyl1 , 380A8F, 1, 0000, 1
, 0, 0.75, 0, '░KW'
#002: dwkrz_1 , IgnitionRetardCyl4 , 380A90, 1, 0000, 1
, 0, 0.75, 0, '░KW'
#003: dwkrz_2 , IgnitionRetardCyl2 , 380A91, 1, 0000, 1
, 0, 0.75, 0, '░KW'
#004: dwkrz_3 , IgnitionRetardCyl3 , 380A92, 1, 0000, 1
, 0, 0.75, 0, '░KW'
#005: fr_w , LambdaControl , 382792, 2, 0000, 0
, 0, 3.05176e-005, 0, '-'
#006: fra_w , AdaptationPartial , 381F8A, 2, 0000, 0
, 0, 3.05176e-005, 0, '-'
#007: fzabgs_w , CountMisfireTotal , 38185C, 2, 0000, 0
, 0, 1, 0, '#'
#008: gangi , SelectedGear , 3809A4, 1, 0000, 0
, 0, 1, 0, 'gear'
#009: lamfa_w , TargetAFRDriverRequest , 384ACE, 2, 0000, 0
, 0, 0.000244141, 0, '-'
#010: lamsbg_w , AirFuelRatioDesired , 381F78, 2, 0000, 0
, 0, 0.000244141, 0, '-'
#011: lamsoni_w , AirFuelRatioCurrent , 381B2E, 2, 0000, 0
, 0, 0.000244141, 0, '-'
#012: ldtvm , WastegateDutyCycle , 380AD4, 1, 0000, 0
, 0, 0.390625, 0, '%'
#013: ldtvr_w , WastegateDutyCycleBeforeLin , 382368, 2, 0000, 1
, 0, 0.005, 0, '%'
#014: mrfa_w , DriverRequestedRelTorque , 38255C, 2, 0000, 0
, 0, 0.00305176, 0, '%'
#015: mshfm_w , MassAirFlow , 00F9A6, 2, 0000, 0
, 0, 0.0277778, 0, 'g/s'
#016: nmot , EngineSpeed , 00F89C, 1, 0000, 0
, 0, 40, 0, 'rpm'
#017: plsol , BoostPressureDesired , 380A09, 1, 0000, 0
, 0, 10, 0, 'mbar'
#018: pus_w , BaroPressure , 384A68, 2, 0000, 0
, 0, 0.0390625, 0, 'mbar'
#019: pvdkds_w , BoostPressureActual , 381E2C, 2, 0000, 0
, 0, 0.0390625, 0, 'mbar'
#020: rkat_w , AdaptationIdle , 384AB4, 2, 0000, 1
, 0, 0.046875, 0, '%'
#021: rkrn_w_0 , KnockVoltageCyl1 , 384B5E, 2, 0000, 0
, 0, 0.0195313, 0, 'V'
#022: rkrn_w_1 , KnockVoltageCyl4 , 384B60, 2, 0000, 0
, 0, 0.0195313, 0, 'V'
#023: rkrn_w_2 , KnockVoltageCyl2 , 384B62, 2, 0000, 0
, 0, 0.0195313, 0, 'V'
#024: rkrn_w_3 , KnockVoltageCyl3 , 384B64, 2, 0000, 0
, 0, 0.0195313, 0, 'V'
#025: rl , EngineLoad , 00F9B3, 1, 0000, 0
, 0, 0.75, 0, '%'
#026: rlmax_w , EngineLoadCorrected , 38239E, 2, 0000, 0
, 0, 0.0234375, 0, '%'
#027: rlmx_w , EngineLoadSpecified , 3823A0, 2, 0000, 0
, 0, 0.0234375, 0, '%'
#028: rlsol_w , EngineLoadRequested , 381EE8, 2, 0000, 0
, 0, 0.0234375, 0, '%'
#029: tabgbts_w , EGTForPartProtection , 384B12, 2, 0000, 0
, 0, 0.0195312, 50, '░C'
#030: tabgm , EGTModelBeforeCat , 38482F, 1, 0000, 0
, 0, 5, 50, '░C'
#031: tans , IntakeAirTemperature , 380A44, 1, 0000, 0
, 0, 0.75, 48, '░C'
#032: tanslin , IntakeAirTemperature , 384894, 1, 0000, 0
, 0, 0.75, 48, '░C'
#033: ti_b1 , FuelInjectorOnTime , 381F4A, 2, 0000, 0
, 0, 0.00266667, 0, 'ms'
#034: tmot , CoolantTemperature , 380A45, 1, 0000, 0
, 0, 0.75, 48, '░C'
#035: uulsuv_w , O2SVoltageWideband , 380E02, 2, 0000, 0
, 0, 0.00488281, 0, 'V'
#036: vfil_w , VehicleSpeed , 381BF4, 2, 0000, 0
, 0, 0.0078125, 0, 'km/h'
#037: wdkba , ThrottlePlateAngle , 3809C2, 1, 0000, 0
, 0, 0.392157, 0, '% DK'
#038: wkrm , AvgIgnitionRetardKnockControl , 00F9D6, 1, 0000, 0
, 0, -0.75, 0, '░KW'
#039: wnwi_w , CamshaftAngle , 384998, 2, 0000, 1
, 0, 0.00390625, 0, '░KW'
#040: wped_w , AccelPedalPosition , 381C2E, 2, 0000, 0
, 0, 0.0015259, 0, '% PED'
#041: zwist , IgnitionTimingAngle , 00FA0A, 1, 0000, 1
, 0, 0.75, 0, '░KW'
#042: zwout , IgnitionTimingAngleOverall , 00FA0C, 1, 0000, 1
, 0, 0.75, 0, '░KW'
#043: B_ldob , CondOverboostActive , 00FD81, 1, 0080, 0
, 0, 1, 0, ''
Logged data size is 68 bytes.
Really logged are 40 entries with 68 bytes.
FTDI library version 30118
Start connecting to ECU at 05.06.2015 10:53:49.763
try connect slow(11)
try connect slow(11)
=> FLASH (slowinit)
ecuid reports software version
Started session86, speed=56000
-> Read ECU ID's .... done
-> Checked ECU ID's
Found bootrom version 05.12/05.32 via readmem
Read pointer ... done
Store handler ... done
Verify handler ... done
Redirect pointer ... done
Test handler ... done
Opened logfile C:\Users\Gperman\Desktop\ME7Logger_DIST_10072013_v1.20\logs\stock
unmodified copy_template_20150605_105355.csv
-> Start logging (logdata size=68, 20 samples/second, 56000 baud) at 05.06.2015
10:53:55.565
Press ^C to stop logging
.Got error -8
10:53:57.028-053,9 os_sendbuf(len=3, data= 01 B7 B8)
10:53:57.032-630,2 os_rcvbyte(timeout=100) -> 01
10:53:57.033-249,9 os_rcvbyte(timeout=100) -> B7
10:53:57.035-840,2 os_rcvbyte(timeout=100) -> B8
10:53:57.188-071,8 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:57.244-212,2 os_sendbuf(len=3, data= 01 B7 B8)
10:53:57.248-622,5 os_rcvbyte(timeout=100) -> 01
10:53:57.249-258,6 os_rcvbyte(timeout=100) -> B7
10:53:57.251-833,0 os_rcvbyte(timeout=100) -> B8
10:53:57.404-071,4 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:57.460-195,2 os_sendbuf(len=3, data= 01 B7 B8)
10:53:57.464-623,5 os_rcvbyte(timeout=100) -> 01
10:53:57.465-250,5 os_rcvbyte(timeout=100) -> B7
10:53:57.468-311,3 os_rcvbyte(timeout=100) -> B8
10:53:57.620-239,2 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:57.678-578,6 os_sendbuf(len=3, data= 01 B7 B8)
10:53:57.682-625,3 os_rcvbyte(timeout=100) -> 01
10:53:57.683-508,6 os_rcvbyte(timeout=100) -> B7
10:53:57.683-804,5 os_rcvbyte(timeout=100) -> B8
10:53:57.836-239,7 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:57.892-239,8 os_sendbuf(len=3, data= 01 B7 B8)
10:53:57.896-620,6 os_rcvbyte(timeout=100) -> 01
10:53:57.897-353,3 os_rcvbyte(timeout=100) -> B7
10:53:57.899-867,9 os_rcvbyte(timeout=100) -> B8
10:53:58.052-106,7 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:58.108-233,9 os_sendbuf(len=3, data= 01 B7 B8)
10:53:58.111-617,7 os_rcvbyte(timeout=100) -> 01
10:53:58.113-268,3 os_rcvbyte(timeout=100) -> B7
10:53:58.115-802,1 os_rcvbyte(timeout=100) -> B8
10:53:58.268-265,9 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:58.326-617,3 os_sendbuf(len=3, data= 01 B7 B8)
10:53:58.330-620,8 os_rcvbyte(timeout=100) -> 01
10:53:58.331-737,6 os_rcvbyte(timeout=100) -> B7
10:53:58.334-532,0 os_rcvbyte(timeout=100) -> B8
10:53:58.484-132,5 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:58.540-187,4 os_sendbuf(len=3, data= 01 B7 B8)
10:53:58.543-623,0 os_rcvbyte(timeout=100) -> 01
10:53:58.545-541,7 os_rcvbyte(timeout=100) -> B7
10:53:58.545-876,6 os_rcvbyte(timeout=100) -> B8
10:53:58.698-130,8 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:58.754-122,5 os_sendbuf(len=3, data= 01 B7 B8)
10:53:58.758-623,9 os_rcvbyte(timeout=100) -> 01
10:53:58.759-389,1 os_rcvbyte(timeout=100) -> B7
10:53:58.761-968,7 os_rcvbyte(timeout=100) -> B8
10:53:58.914-225,0 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
10:53:58.972-809,1 os_sendbuf(len=3, data= 01 B7 B8)
10:53:58.976-619,3 os_rcvbyte(timeout=100) -> 01
10:53:58.977-839,2 os_rcvbyte(timeout=100) -> B7
10:53:58.980-601,8 os_rcvbyte(timeout=100) -> B8
10:53:59.133-233,3 os_rcvbyte(timeout=150) -> TIMEOUT
Got error -8
=> Logging failed
exiting (cause=0x4)...
C:\Users\Gperman\Desktop\ME7Logger_DIST_10072013_v1.20> Not sure what to make of this -8 error or what to do with it. Help! Dead in tracks!
Title: Re: ME7Logger problems
Post by: golfputtputt on June 06, 2015, 10:27:53 AM
Cable only works with some baud rates: 19200 and 125000
Not sure why such drastic swings in data transfer compatibility with the cable. Anyone have any ideas?
And could someone explain fast init to me and why my cable can't use it?
Title: Re: ME7Logger problems
Post by: nyet on June 06, 2015, 10:31:51 AM
Not sure why such drastic swings in data transfer compatibility with the cable. Anyone have any ideas?
If I had to guess; some cables have shittier clock chips than others. And could someone explain fast init to me and why my cable can't use it?
fast/slow init is a function of what the ECU supports.
Title: Re: ME7Logger problems
Post by: golfputtputt on June 06, 2015, 04:15:27 PM
If I had to guess; some cables have shittier clock chips than others. Even the genuine ross-tech vcds cable? seems odd that a company like that would chince on that. Either way, I final got ME7logger working and taking logs. Time to start changing things!
|