|
Title: ARX engine with a vrs map (octavia 1.8t) Post by: moxxie on June 25, 2015, 07:45:42 AM hey guys just a quick question before i have a go at it
i have a octavia 4x4 1.8t with the engine code ARX and i was wondering if i can use a VRS map as a base to tune off as i guess the vrs map will be more readily available and thud the damos / xdf will be also ? cheers Title: Re: ARX engine with a vrs map (octavia 1.8t) Post by: tjwasiak on June 25, 2015, 09:11:09 PM I would stick to your file as first you would have to compare both engines hardware-wise to tell if you can use different file as a base. In fact it would not be that hard to define all maps for stage 1 on yours file using any well defined file...
Title: Re: ARX engine with a vrs map (octavia 1.8t) Post by: moxxie on June 27, 2015, 04:12:11 AM ok so ive read my ecu and got a base bin, i believe physically my engine is the same as a vrs just a smaller turbo but im pretty confident the engine is VERY similar var the turbo.
so in that case or can i just copy the vrs map and copy the whole map over and upload that to my ecu? cheers Title: Re: ARX engine with a vrs map (octavia 1.8t) Post by: fknbrkn on June 27, 2015, 04:43:34 AM ARX has the same hardware as AUQ engine
so yes you can load AUQ file into your ecu. but remember that crossflashing are not reccomended and there is a chance to brick your ecu Title: Re: ARX engine with a vrs map (octavia 1.8t) Post by: moxxie on June 27, 2015, 10:45:56 AM ok so can i use my bin with AUQ xdf? or do i have to make/find one ? ive mapped lots of saabs using T5 but with them you can use the same bin eather it be a 900 or 93 or a 900 as long as its the same engine.
cheers for your help guys Title: Re: ARX engine with a vrs map (octavia 1.8t) Post by: _nameless on June 27, 2015, 11:42:21 AM ok so can i use my bin with AUQ xdf? or do i have to make/find one ? ive mapped lots of saabs using T5 but with them you can use the same bin eather it be a 900 or 93 or a 900 as long as its the same engine. NO, the xdf is for that software version only for that engine code only. addresses are different between files, some are close and can be used as reference to make your own xdf based off a decently defined one. if your car is wideband o2 take your pick from many of the mk4 variant files aww awp, aum, awv, auq etc. find the correct xdf for the file of your choice and start from there. you need to know the immo version of your car so you can pick the correct file. if you flash a immo 2 ecu with a immo 3 filethe car will shutdown on immo. best thing to do is read out the orig file of your car and post it. most members will not even help you unless you follow the rules in the stickies.cheers for your help guys Title: Re: ARX engine with a vrs map (octavia 1.8t) Post by: moxxie on June 28, 2015, 01:41:11 AM ok so heres my original bin, if it helps or do you mean the basic ecu info Nefmoto supply, is fo im on my pc atm and will upload that later also
cheers guys EDIT: more info when i google my HWnumber :6A906032HJ i came across this info https://www.carfiles.net/audi-a3-1.8t-bosch-me7.5-1011 Title: Re: Post by: mushtafa on July 31, 2015, 10:45:33 AM I thought the ARX engine was conventional cable throttle?
Title: Re: Post by: Black_A4 on August 13, 2015, 11:12:05 PM I thought the ARX engine was conventional cable throttle? no. The ARX engine is mostly the same like AUM/AUQ |