Print Page - Audi A3 1.8T Bosch ME7.5.5

Hi , i have a bosch me 7.5.5 .... i used galletto 1260 to get the ecu bin , and use winosl to get the info .
The problem is that when i create the maps in tunerpro using this addresses :

Code:

MAP FOUND: KFZWOP 11x16 @ 0x11557
MAP FOUND: KFZWOP2 11x16 @ 0x11607
MAP FOUND: KFZW 12x16 @ 0x120DD
MAP FOUND: KFZW2 12x16 @ 0x1219D
MAP FOUND: KFMIRL 16x16 @ 0x150CA
MAP FOUND: KFMIOP 11x16 @ 0x16616
MAP FOUND: KFLBTS 16x12 @ 0x192A6
MAP FOUND: LAMFA 6x15 @ 0x1C98A
MAP FOUND: KFLDIMX 8x16 @ 0x1E200
MAP FOUND: KFLDHBN 8x8 @ 0x1E8F2
MAP FOUND: KFDLULS 8x8 @ 0x1EB93
MAP FOUND: KFLDRL 10x16 @ 0x1E352
MAP FOUND: LDRXN 16x1 @ 0x1EAD4
MAP FOUND: LDRXNZK 16x1 @ 0x1EB16
MAP FOUND: VMAXNB 1x1 @ 0x1F49A
MAP FOUND: VMAXTM 5x1 @ 0x1F4A8
MAP FOUND: VNMX 1x1 @ 0x116C8
MAP FOUND: NMAXDVG 1x8 @ 0x1F478
MAP FOUND: NMAXGA 1x8 @ 0x1F488
MAP FOUND: NMAX 1x1 @ 0x1679A
MAP FOUND: NMAXDV 1x1 @ 0x1679C
MAP FOUND: NMAXOG 1x1 @ 0x167A2
MAP FOUND: DNMAXH 1x1 @ 0x16794
MAP FOUND: ITNMXH 1x1 @ 0x16798
MAP FOUND: TMOTNMX 1x1 @ 0x1F498
MAP FOUND: TNMXH 1x1 @ 0x167A6
MAP FOUND: CWDLSAHK 1x1 @ 0x186F7
MAP FOUND: CDKAT 1x1 @ 0x181A3
MAP FOUND: CDHSH 1x1 @ 0x1819E
MAP FOUND: CDHSHE 1x1 @ 0x1819F
MAP FOUND: CDHSHE 1x1 @ 0x1819F
MAP FOUND: CDLSH 1x1 @ 0x181AB
MAP FOUND: CDSLS 1x1 @ 0x181B0
MAP FOUND: CLAHSH 1x1 @ 0x10751
MAP FOUND: CLAHSH2 1x1 @ 0x10752
MAP FOUND: CLAHSH2 1x1 @ 0x10752
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLAHSHE 1x1 @ 0x10753
MAP FOUND: CLASLPE 1x1 @ 0x10786
MAP FOUND: CLASLVE 1x1 @ 0x10789
MAP FOUND: CLASLVE 1x1 @ 0x1078C
MAP FOUND: KRKTE 1x1 @ 0x1C830

(http://nefariousmotorsports.com/forum/index.php?topic=4876.0;wap2)
or even the .dam files for this specific ecu still some of the maps look completely wrong.
Does somebody know whats going on ..... are the addresses wrong or do i have to make some calculations to the cell value ??
It's my first time playing with ecu files ,, so i would be very thankful for your help.

PS. because i wasn't able to make OLS521.dll work with ols i am using notepad to view the .dam files (witch is kinda noob-ish )
I will attach the files i am using ..... if there is something wrong with them ?

PSS. i have damos superpack ( 2 600 files ) and most of the winols DLL files ... so if someone needs them just PM me :)

NefMoto

ECU Files => ECU Definition Files => Topic started by: dope40 on June 25, 2015, 10:28:50 AM