|
Title: wanted: cheap and decent canbus sniffer Post by: k0mpresd on July 06, 2015, 07:00:28 PM looking to purchase a cheap and decent canbus sniffer as a hobby project for something.
whats a good one to look for? thanks. Title: Re: wanted: cheap and decent canbus sniffer Post by: aef on July 06, 2015, 10:13:39 PM arduino can bus shield?
or http://shop.dieselschrauber.de/can-usb-interface-kit-rks-can-p-313.php Title: Re: wanted: cheap and decent canbus sniffer Post by: seishuku on July 07, 2015, 03:14:03 PM I made my own with an STM32F429 Discovery and a $3 chinese CANBus transceiver, total cost of about $30 shipped... Not including the custom firmware and software I had to write. ::)
Title: Re: wanted: cheap and decent canbus sniffer Post by: roth18 on July 24, 2015, 08:49:22 PM looking to purchase a cheap and decent canbus sniffer as a hobby project for something. whats a good one to look for? thanks. http://www.elrasoft.com/uucan.htm Title: Re: wanted: cheap and decent canbus sniffer Post by: dream3R on October 09, 2015, 01:22:09 PM Arudino + shield or chipkit.
I'll open source the code if people want to contribute... Title: Re: wanted: cheap and decent canbus sniffer Post by: ozzy_rp on October 09, 2015, 03:33:18 PM Arudino + shield or chipkit. It would be great!I'll open source the code if people want to contribute... Title: Re: wanted: cheap and decent canbus sniffer Post by: dream3R on October 09, 2015, 03:35:02 PM It would be great! So what kit have you got? I have some old code for ardunio thats serial based also yo can use canhacker with it Title: Re: wanted: cheap and decent canbus sniffer Post by: dream3R on October 09, 2015, 03:37:48 PM Actually the chipkit with the network shield is the way forward, I'll code something raw and open source it when i get my B8 back? Checkout OpenXC too as it's chipkit compatible.
Either that or an arduino setup, problem is only one can controller. A front end can be done simply too with C# filtering etc no idea in C# I just dumped the raw logs into SQL Title: Re: wanted: cheap and decent canbus sniffer Post by: ozzy_rp on October 09, 2015, 03:43:01 PM So what kit have you got? I have some old code for ardunio thats serial based also yo can use canhacker with it I have arduino kit based on MCP2515 and canhacker :) Title: Re: wanted: cheap and decent canbus sniffer Post by: dream3R on October 09, 2015, 03:44:14 PM I have arduino kit based on MCP2515 and canhacker :) So you're not the OP, what do you want? Canhacker is quite good at sniffing. I'm confused as what you have is open source lol Title: Re: wanted: cheap and decent canbus sniffer Post by: adam- on October 10, 2015, 01:11:02 AM If you want a shield I've got one sitting in a box doing nothing after I bought it cause I'm an idiot.
Yours for some beer tokens. But it'll probably cost more in shipping than what you guys can get it for in the States. Enjoy your crab and beer dude! Title: Re: wanted: cheap and decent canbus sniffer Post by: hackish on October 16, 2015, 11:48:29 PM I made a y cable years ago using parts harvested from the scrapyard then used a spare J2534 tactrix cable in sniff mode since it let me capture kline traffic too. I did it this way because it was reliable and the output was easy to parse. I also bought a usbee when they first came out to deal with timing and kline baud changes but honestly, their software and support are garbage.
Title: Re: wanted: cheap and decent canbus sniffer Post by: roth18 on April 26, 2017, 12:31:18 PM Open source project - you can modify firmware according to your needs. If that's what you looking 4.
http://cartools.lv/Shop/product_info.php?cPath=26&products_id=99 Developer ---> http://www.mictronics.de/projects/usb-can-bus/ |