NefMoto

Good day,

Does anyone perhaps have a definitions file for the above mentioned ECU?

Original File Attached

What were you looking to do? I have some locations, but it's not in xdf format.

I'm basically trying to scale my 550cc injectors to my ECU as my stock injectors have been replaced with Bosch 550cc EV14's after my stock injectors suffered O-Ring Failure.

Any sort of assistance would be much appreciated. I'm also trying to figure things out using Tunerpro and making notes using other stock Bin and XDF files to see if I can find locations but it's quite difficult as I'm just starting out.

Finding KRKTE and TVUB (which should be sufficient for your new injectors) should not be to difficult using other defined files as a reference.

If you have just a few defined files to compare you should be able to find all maps required for stage 1 tune pretty easily.

I'll give that a bash in the morning.

Thanks for the advice :) I have been trying though, it's just a bit difficult for me to get my head around it but as they say, practice makes perfect.

KRKTE should be either 1FA0A, or 1FA18 (16 bit). Maybe someone else can verify?

Spent some time working on this

0x1FA18 is KRKTE
0x14E00 is TVUB
0x14DFB is TVUB Axis

That's what I've found so far, let's see how far I can get

I got everything sorted. Car is now scaled perfectly to the Bosch 550cc EV14's

Thanks for all the assistance and the motivation to go and get things done myself :D

We are still waiting for your XDF with all the maps required for stage 1 tune ;D 8)

Lol, it's going to be a while, I'm actually finding many maps right now so please be patient :P

Found

TVUB
KRKTE
KFZWOP
KFZWOP2
LAMFA
LDRXN

And I'm still going

If you found LDRXN it should not be that hard to find LDRXNZK also. As you already found LAMFA you should look for ZKLAMFAW, FBSTABGM, KFDLBTS and TABGBTS nearby. I would look for KFMIRL and TEMIN(+VA) before TVUB and for KFPED* after TVUB.

I'll get right to it. I don't have many other definitions to go by, I'm actually just using a bin and definition set that I found here on Nefmoto and it's mostly hit or miss, but I'll keep pushing ahead to see what I can find.

Based on my comparisons, TVUB axis should be 14DFA. I could be wrong.

Is it possible to update the thread with your locations for these maps?

If I use 14DFA for TVUB my first value is 0.35 which doesn't seem right.

Also, I'm just using other maps as references, I still don't understand the hex though and how it ties together etc.

TVUB - 0x14E00
TVUB Axis - 0x14DFB
KRKTE - 0x1FA18
KFZWOP - 0x11C2C
KFZWOP2 - 0x11CDC
KFZWOP Load Axis - 0x168BE
KFZWOP RPM Axis - 0x138E4
LAMFA - 0x26E66
LAMFA Columns - 0x26E5A
LAMFA Rows - 0x26E4A
LDRXN - 0x29C8A
KFZW - 0x12850
KFZW2 - 0x12910
LDRXNZK - 0x29CCC
KFLDHBN - 0x29958
KFMIOP - 0x1675C
KFNWSE - 0x2C6D2
KFMIRL - 0x1EFD4
KFLBTS - 0x19AE5
KFFDLBTS - 0x19A25

Also the file that I posted has extremely bad timing according to my logs. -9 CF's on cylinders 2-4 from 3000rpm up at WOT

Double Post :/ I'll put something else here

For me using 14DFA for TVUB's axis looks correct. The hex string is "05 71 8E AA C7 E3" for the axis. Not sure why we're seeing differences. I double checked all your other addy's and they look good.

You must have missed the fact Pynoxim listed 0x029CCC for both LDRXN and LDRXNZK ;D

I did.  ;D Only checked one.

Lol not even I noticed that :D Go easy on me, I'm trying my best.

I found LDRXN though :P 29C8A as well as KFLDHBN

Having a tough time finding KFLAMKR and KFLAMKRL, any assistance perhaps? I've updated more things on the last page