|
Title: TL866CS programmer and 29F800BB, no IC Config Information displayed Post by: walt on July 21, 2015, 04:31:30 PM Hello, I have a KEE USB programmer. The 'About' tab of the software displays this:
App Software 6.16, Firmware 3.2.68, Model TL866CS When I plug in a 29F800BB chip, the software does not display the ic config information. I was hoping to see the protected/unprotected status of the chip. I tried programming and erasing a spare, blank 29F800BB and that seemed to work fine, but again no config information, or ability to set clear sector protection. Is this a limitation of the programmer, maybe due to having to use an adapter to plug in the chip? I tried a different chip, AM29F002BB, and the software did show the configuration information, and allows me to set/clear sector protection. |