|
Title: ECU connected but cant read ...Bosch Me7.5 4B0906018AL Post by: Jim_Coupe on July 21, 2015, 07:31:21 PM Hi, I just connected my ECU on the bench here now.. It says im connected via KWP2000 protocol in the info text but the Read ECU button is grayed out.. Tip tool says not connected to ECU?
Any clues? Followed the drawing below Title: Re: ECU connected but cant read ...Bosch Me7.5 4B0906018AL Post by: nyet on July 21, 2015, 07:35:30 PM Does vcds connect?
Title: Re: ECU connected but cant read ...Bosch Me7.5 4B0906018AL Post by: Jim_Coupe on July 21, 2015, 07:37:37 PM No i dont.. Maybe i shall follow this
http://nefariousmotorsports.com/forum/index.php?topic=5068.0 Title: Re: ECU connected but cant read ...Bosch Me7.5 4B0906018AL Post by: Jim_Coupe on July 21, 2015, 07:39:39 PM This is an ECU with immo on.. But I should be able to read from it anyway ?
Title: Re: ECU connected but cant read ...Bosch Me7.5 4B0906018AL Post by: Jim_Coupe on July 21, 2015, 07:41:18 PM False FLAG.. It Works now hmmm... Better check my connectors. Maybe im a bit tired :(
Title: Re: ECU connected but cant read ...Bosch Me7.5 4B0906018AL Post by: Jim_Coupe on July 21, 2015, 07:54:55 PM Bedore i go to bed... I have searched where to get the memorylayout file... Where can i get these from ?
Title: Re: ECU connected but cant read ...Bosch Me7.5 4B0906018AL Post by: Jim_Coupe on July 21, 2015, 08:28:19 PM Problem solved... LoL Win XP hide the files... crap ;D
Title: Re: ECU connected but cant read ...Bosch Me7.5 4B0906018AL Post by: majsterx on October 02, 2015, 12:12:52 AM When immo on should be no problem with read.. but write will be blocked by eeprom.
|