|
Title: agu me 3.8 with vr6 maf Post by: Ga3T on July 24, 2015, 11:45:24 AM i know the max maf reading on agu is around 187
deos this mean if i fit vr6 maf it will read more than 187? i have k04 with stock maf and injectors maf reading is 187 now i fitted bigger injectors and vr6 maf with new tune it reads now 153. so is 153 is ok? or it should get mote than 187? Title: Re: agu me 3.8 with vr6 maf Post by: Rick on July 24, 2015, 12:27:07 PM Depends how it's been tuned.
Title: Re: agu me 3.8 with vr6 maf Post by: Ga3T on July 25, 2015, 12:04:53 AM how i can calculate the hp now?
150*1.3/0.8? Title: Re: agu me 3.8 with vr6 maf Post by: evolution on July 25, 2015, 12:32:06 AM you have to make a recalibration of the software. MAF linearization , calibration of the injectors and modify maps and multipliers . You will not have to convert power, and the ECU will indicate the true value of air flows , torque
Title: Re: agu me 3.8 with vr6 maf Post by: Ga3T on July 25, 2015, 03:55:56 AM Didnot understand you
So the tune is not ok? Title: agu with vr6 maf housing Post by: Ga3T on May 20, 2016, 01:36:38 PM i have Q HOW TO CALCULATE HP AFTER FITTING VR6 HOUSING WITH NEW MAP?
MY CAR READS 158 GS/S WITH VR6 HOUSING WITHOLD MAP STOCK HOUSING WAS 187GS Title: Re: agu me 3.8 with vr6 maf Post by: nyet on May 20, 2016, 01:45:35 PM WHAT
Title: Re: agu me 3.8 with vr6 maf Post by: eliotroyano on May 20, 2016, 01:57:56 PM you have to make a recalibration of the software. MAF linearization , calibration of the injectors and modify maps and multipliers . You will not have to convert power, and the ECU will indicate the true value of air flows , torque Well said in just 2 lines ;D ;D ;D ;D Title: Re: agu me 3.8 with vr6 maf Post by: Carsinc on May 20, 2016, 08:23:30 PM Title: Re: agu me 3.8 with vr6 maf Post by: 6L20vt on May 23, 2016, 10:42:26 PM hello, if you're using the original sensor, you must use mafadjustus to calculate your new map maf . if you are using a full maf 3 " including the original sensor, perhaps you can use the mlhfm a s3 / tt engine bam . in either case you have to recalibrate the software to go with that maf.quizas have to recalibrate more things , I'm having a similar problem with a maf of leon cupra , and I 'm using the mlhfm a leon.bin , so it is not so simple, it takes time and testing to work well . greetings
|