|
Title: retreiving map of dead ecu me 7.5 Post by: dik-van-dub on July 25, 2015, 01:07:32 PM hi guys does anyone know a way of retrieving a map from an ecu thats dead? ive managed to damage the tracks trying to remove the 95040 chip from ecu but would like to try and retrieve the map back off it to load onto my new one
Title: Re: retreiving map of dead ecu me 7.5 Post by: armageddon on July 25, 2015, 03:07:33 PM remove the flash eprom and solder it on new ecu or use some eprom programer to read it
Title: Re: retreiving map of dead ecu me 7.5 Post by: dik-van-dub on July 26, 2015, 05:42:25 AM which one is the flash eeprom?
Title: Re: retreiving map of dead ecu me 7.5 Post by: armageddon on July 26, 2015, 06:19:57 AM (http://s2.postimg.org/5ozz4sog9/ME_7_5.jpg) (http://postimage.org/)
Title: Re: retreiving map of dead ecu me 7.5 Post by: dik-van-dub on July 26, 2015, 07:33:48 AM cheers for that
Title: Re: retreiving map of dead ecu me 7.5 Post by: fredrik_a on July 26, 2015, 04:23:57 PM Readers are available from several manufacturers in several different versions with different coverage.
Through the years, I've used a BX40 from http://www.batronix.com/shop/programmer/eprom-programmer.html and it works perfectly. |