|
Title: Anyone help with an XDF or a damos file Post by: Dart2525 on July 27, 2015, 06:56:16 AM Hello everyone. Pleas Help me if you can ? I searched everywhere damos file to my car, but who does not want to be divided. Now I live in Ukrain - but It is hard to find a man versed in tuning the firmware car Passat b5 2.8 V6 Motronic Benzin ME 7.1 001 AMX 142Kw 3B0907551CH 0261207469 with the same problem, remove the catalyst and the errors were the second lambda . Maybe someone has already worked with 3B0907551CH 0261207469? i want -removal of DTC -removal of Cat control function, second lambda sensor off. P/S/ peace to all the earth Title: Re: Anyone help with an XDF or a damos file Post by: vwaudiguy on July 27, 2015, 09:02:08 AM Can you post your original?
Title: Re: Anyone help with an XDF or a damos file Post by: Dart2525 on July 28, 2015, 12:38:48 AM Yes, of course that's the original
Title: Re: Anyone help with an XDF or a damos file Post by: Dart2525 on July 28, 2015, 12:41:45 AM But Fail sent me ecufiles.com I did not understand that they have changed , but there are differences from the original .
Title: Re: Anyone help with an XDF or a damos file Post by: ddillenger on July 28, 2015, 01:20:08 AM Fueling and timing changes. Between 2 and 4.5 degrees added to the top end, richened up, etc, etc. It is what it is. Seems safe enough if you're running 93+ octane/98RON
Try to refrain from posting commercial files. Title: Re: Anyone help with an XDF or a damos file Post by: Dart2525 on July 28, 2015, 04:46:01 AM In general, there is no problem except for the machine errors lambda 2 and the secondary air system . So I set out to disconnect the lambda probe 2 , and the secondary air system . But without XDF or a damos file you know it's almost impossible to do , especially with my knowledge in this area :(.
|