|
Title: i just need some help Post by: jimmer009 on July 30, 2015, 02:36:07 PM So I bricked my ecu awhile ago. And I got a used ecu out of a all road. It's a 4d0907551k. I plug it into the car. And it starts up and shuts down right after.
My car is a 2000 s4. It had a A box. I put a single turbo on. I also have a 85mm Hitachi maf. I had it running on my a box before. Vcds is only showing a code for open circuit 02 sensor. I have a stock MBox file I can flash to it. But please help. I was told the ecu I got would not have an immobileizer. Is that right???? Title: Re: i just need some help Post by: jimmer009 on July 30, 2015, 02:43:21 PM I meant I got it out of a6 not an all road sorry
Title: Re: i just need some help Post by: ddillenger on July 30, 2015, 03:15:48 PM 4B0907551K is a 2000 A6 Bosch MAF 6 speed non immobilizer. If the car is shutting off, something else is up.
Title: Re: i just need some help Post by: jimmer009 on July 30, 2015, 05:18:13 PM The maf was problem. UN plugged it and it and now it runs like crap!!! The tune will fix that
Title: Re: i just need some help Post by: ddillenger on July 30, 2015, 06:46:48 PM stock injectors in there still?
Title: Re: i just need some help Post by: jimmer009 on July 30, 2015, 07:36:35 PM Yes they are
|