|
Title: Siemens Simos DTC remove Post by: sadlorobiknagi2 on August 08, 2015, 05:19:29 AM Hello friends.
Can anyone help me removing DTC from Skoda 1.2 12v? I need to remove this: 16514/P0130/000304 - Oxygen (Lambda) Sensor B1 S1: Malfunction in Circuit 17925/P1517/005399: Power Supply Relay for ECU (J271 or J363): Electrical Malfunction 17511/P1103/004355 - Oxygen (Lambda) Sensor Heating; B1 S1: Performance too Low 17524/P1116/004374 - Oxygen (Lambda) Sensor Heating Bank 1 Sensor 1: Open Circuit 16490/P0106/000262 - Manifold / Barometric Pressure Sensor (G71) / (F96): Implausible Signal 17658/P1250 - Fuel Level too Low But removing all dtc is ok too. The main problem is when Lambda heating error occure it disable esp. After few km it start working again, but its annoying. Hope u can help me guys. Title: Re: Siemens Simos DTC remove Post by: prj on August 08, 2015, 06:26:26 PM Replace the damn sensor.
Title: Re: Siemens Simos DTC remove Post by: k0mpresd on August 08, 2015, 08:57:30 PM Replace the damn sensor. you mean actually fix a car instead of just bandaid'ing the problem? that is crazy talk. ::) Title: Re: Siemens Simos DTC remove Post by: sadlorobiknagi2 on August 08, 2015, 11:05:02 PM Sensor replaced, but problem remains. Checked wiring, and signal from ecu and everything is ok. Lambda heating works well, but dtc appear. I cant fix it thats why im looking for solution this way...
The car have fuel level error even with full tank. Title: Re: Siemens Simos DTC remove Post by: prj on August 09, 2015, 03:01:56 AM Then fix the electrical problems on the car.
Title: Re: Siemens Simos DTC remove Post by: sadlorobiknagi2 on August 09, 2015, 05:34:36 AM OK, i will try replacing ECU. Thanks for help.
Title: Re: Siemens Simos DTC remove Post by: ddillenger on August 09, 2015, 08:39:14 AM Did you use a factory o2 sensor?
|