NefMoto

I ve tried to find the tables but without success.

Dont know what subcategory these are ocated in my damos?

CDLDP
CDTES
CLATEVE
CLALDPE

Audi TT 3.2 2007
Bosch Me7.1.1 G 40Mhz ST10 based ECU
BOx number: 022906032HJ

I need to Disable DTC´s for Rear O2 sensors 1 and 2 and I have deleted EVAP system. My LTFT is diabled :(
Help is apriciated.

its a long shot. But in my xdf its labeled under the category of BGTUMG: 720 Berechnete

its a long shot. But in my xdf those scalars are labeled under the category of BGTUMG: 720 Berechnete grobe Umgebungstemperatur for CDLDP and cdtes. For CLATEVE and CLALDPE its under DFPM_DEKON.

 BGTUMG OK! Im gonne check that out :)  Thanks.

I Found them... I compared a damos file from anoter ECU but its har to find Scalars.. I got 88 search find on data that might match lol.. How do ppl find these scalars ?

Usually they are in a series with many other scalars. the CDLDP and CDTES are a line or two apart in their address. In my ecu file they are located at 181A5 and 181B0 that isnt where yours will be, just an example. In front of and after these two are some other scalars for Catalysts, Sai and Egt sensors in my case. It goes from 18194 to 181B0. You may be able to look at the raw hex and see a sequence. It is easiest if you have a file and map pack for a similar ecu with these variables defined as well as the ones around it like CDKAT  and CDSLS. A similar ecu with similar hardware is likely to have the same sequence or similar even if the offset or hex address is different.

YEs.. Problem is that my Me7.1.1 has no map pack :(   I have to buy one i think.. :(

i have mk5 r32 st10 damos. pm me if interested.

Alrigt ! U got PM