|
Title: Rb4 s4 cluster immo problem Post by: ktm733 on August 09, 2015, 04:27:56 PM So I'm installing new cluster and I've been following ross tech instructions to pair ecu and cluster. It say's immobilizer must be defeated in immo 3 vehicle. I try the 95040 tool and it says ecu not supported. The ecu is from a 2004 s4 4.2l. Is it possible to get around this? I have the pin
Title: Re: Rb4 s4 cluster immo problem Post by: ddillenger on August 09, 2015, 04:43:44 PM Nowhere does it say the immobilizer must be defeated. You cannot adapt components with the immobilizer off.
Read the pin with one of the other 100's of programs capable. Vag K+commander will work. |