NefMoto

Technical => Data Logging => Topic started by: masterj on August 10, 2015, 12:59:47 PM



Title: Need healthy 150bhp 1.8t logs
Post by: masterj on August 10, 2015, 12:59:47 PM
Hello,
I really need a healthy ori (not remapped) mass air flow log (in grams/second) in third gear full pull. If anyone has any done before remapping then please share. thanks.


Title: Re: Need healthy 150bhp 1.8t logs
Post by: KmosK04 on August 10, 2015, 02:30:31 PM
Here you are. Audi TT AUM 150ps stock VCDS logs


Title: Re: Need healthy 150bhp 1.8t logs
Post by: masterj on August 11, 2015, 02:18:42 AM
Here you are. Audi TT AUM 150ps stock VCDS logs

Thanks. Maybe someone has me7logger higher resolution logs 1000rpm to 7000rpm?


Title: Re: Need healthy 150bhp 1.8t logs
Post by: masterj on August 11, 2015, 03:47:23 AM
Here you are. Audi TT AUM 150ps stock VCDS logs

BTW: is this really huge jump of air flow mass <3000rpm correct (26 to 68 g/s)? it is not consistent with all the other maf data.


Title: Re: Need healthy 150bhp 1.8t logs
Post by: MIL_on on August 13, 2015, 10:31:59 PM
There you go.


Title: Re: Need healthy 150bhp 1.8t logs
Post by: masterj on September 30, 2015, 06:53:11 AM
There you go.

thank you very much :)


Title: Re: Need healthy 150bhp 1.8t logs
Post by: aef on November 07, 2016, 11:41:09 AM
What should a mapped one do?
Have 145g/sec right now but car is old with k03 instead of k03s...



Title: Re: Need healthy 150bhp 1.8t logs
Post by: fknbrkn on November 07, 2016, 09:59:17 PM
What should a mapped one do?
Have 145g/sec right now but car is old with k03 instead of k03s...



~ 120 g/s stock 150hp
~ 140 g/s- 180hp
~~ 160 g/s- 200hp