|
Title: having a hard time reading a used a6 ecu Post by: wagstach on August 15, 2015, 12:31:23 PM bought a used a6 ecu, trying to replace my old ecu that got wet "unexpected rain storm while i had the cover off"
the old ecu gave the same galletto error as far as i can see, either i shorted something else out or i bought a dud ecu. check all fuses. should i buy another a6 ecu ? nefmto log in bootmode 15/Aug/2015 03:11:38.501: LOG: Opened FTDI device. 15/Aug/2015 03:11:38.504: LOG: FTDI device info - Description: USB <-> Serial Cable Serial Number: 47514789 Device Type: FT_DEVICE_232R ID: 0x4036001 Device Flags: 0x0 15/Aug/2015 03:11:38.508: LOG: FTDI ChipID DLL is loaded, checking chip ID... 15/Aug/2015 03:11:38.512: LOG: FTDI device chip ID: 0xB5D03FD5 15/Aug/2015 03:11:38.529: LOG: Starting send receive thread. 15/Aug/2015 03:11:38.531: LOG: Send receive thread now started. 15/Aug/2015 03:11:38.534: USER: Disconnected 15/Aug/2015 03:11:38.544: USER: Connecting... 15/Aug/2015 03:11:39.116: USER: Starting bootstrap loader upload. 15/Aug/2015 03:11:39.123: USER: Sent bootstrap init zero byte. 15/Aug/2015 03:11:39.154: USER: Received device ID response for init zero byte. 15/Aug/2015 03:11:39.194: USER: Successfully uploaded bootstrap loader. 15/Aug/2015 03:11:40.197: USER: Failed to receive bootstrap loader started status message. 15/Aug/2015 03:11:40.203: USER: Disconnected 15/Aug/2015 03:11:40.222: USER: Connecting... 15/Aug/2015 03:11:40.236: USER: Starting bootstrap loader upload. 15/Aug/2015 03:11:40.244: USER: Sent bootstrap init zero byte. 15/Aug/2015 03:11:40.278: USER: Received device ID response for init zero byte. 15/Aug/2015 03:11:40.316: USER: Successfully uploaded bootstrap loader. 15/Aug/2015 03:11:41.319: USER: Failed to receive bootstrap loader started status message. 15/Aug/2015 03:11:41.325: USER: Disconnected 15/Aug/2015 03:11:41.345: USER: Connecting... 15/Aug/2015 03:11:41.360: USER: Starting bootstrap loader upload. 15/Aug/2015 03:11:41.370: USER: Sent bootstrap init zero byte. 15/Aug/2015 03:11:44.379: USER: Sent bootstrap init zero byte. 15/Aug/2015 03:11:44.413: USER: Received device ID response for init zero byte. 15/Aug/2015 03:11:44.454: USER: Successfully uploaded bootstrap loader. 15/Aug/2015 03:11:45.461: USER: Failed to receive bootstrap loader started status message. 15/Aug/2015 03:11:45.467: USER: Disconnected 15/Aug/2015 03:11:45.497: LOG: Closing FTDI device. 15/Aug/2015 03:11:45.512: LOG: Send receive thread now terminated. galletto will not read the ecu "errore dataecu" will not write "writing error" Title: Re: having a hard time reading a used a6 ecu Post by: ddillenger on August 15, 2015, 11:20:50 PM Are you in the US? Send me the ecus. I will take a look.
|