NefMoto

Noob Zone => Noob Questions => Topic started by: metronet on August 26, 2015, 07:31:07 PM

Title: ME7.1.1 ESKONF Bit pairs
Post by: metronet on August 26, 2015, 07:31:07 PM

Do I have these correct for a ME7.1.1 ECU?

Example below is from 8E0909559E AVK 3.0

Code:

0C C0 B3 F0 00 02 F3 FF AA FA 55 55 33

0 (VALUE 0C, ADDRESS 0x1121D)
1
2
3 X X X J299
4 X N112 X X
5 LSHHK2 X X X
6 X BKV LSHHK1 X
7
8
9
10
11
12 (VALUE 33, ADDRESS 0x11229)

Any help is much appreciated :)

Title: Re: ME7.1.1 ESKONF Bit pairs
Post by: ddillenger on August 26, 2015, 07:37:59 PM

I posted those before I believe. Yes, they are correct, but I think 6 is

x N115 LSHHK1 x

Title: Re: ME7.1.1 ESKONF Bit pairs
Post by: metronet on August 26, 2015, 09:46:19 PM

I didn't realize the (EVAP canister?) N115 is on the list as well.

I have only seen the solenoid N80 in the engine bay.

Thanks for your help again!

Title: Re: ME7.1.1 ESKONF Bit pairs
Post by: ddillenger on August 27, 2015, 12:16:33 AM

Quote from: metronet on August 26, 2015, 09:46:19 PM

I didn't realize the (EVAP canister?) N115 is on the list as well.

I have only seen the solenoid N80 in the engine bay.

Thanks for your help again!

I am not POSITIVE on the N115, but I have it in my notes, and they are usually correct. Can't hurt to test. They added a bit more to powerstage diagnosis in later ecus.

Title: Re: ME7.1.1 ESKONF Bit pairs
Post by: pukacinio on January 15, 2021, 11:51:24 AM

I've tried some bits and i know where is n249 ;)

Byte 6 : X BKV/N115 LSHHK1 N249