|
Title: 032HF security access rejected Post by: giles92 on August 29, 2015, 08:28:15 PM Ive been trying to write to a 032hf box with a flash file. I got this ecu off of ebay and turned the immo off using me795040 flasher and 95040tool. Now as I try to benchflash it with nefmoto i get this:
Slow init succeeded. Switching to KWP1281 session. KWP1281 connect info: °6A906032LQ 1.8L R4/5VT G01 0007 later on..... ECU reports that security access request was rejected. I decided to bootmode it again and use a generic immo off file with the same result. I noticed nefmoto displays the flash file as a 032LQ on the 032HF box i thought this was odd. Does this mean it has a professional tune on it inhibiting my read? Or is this caused by not being connected to the cluster? It only connects with 124800 baud and switches to kwp1281 then kicks me out. How can i get around this? Would galletto 1260 cable and software work better than generic cable with nefmoto? Ive had no trouble getting into bootmode for the 95040 stuff. Title: Re: 032HF security access rejected Post by: fknbrkn on August 30, 2015, 02:59:19 AM +12v to pin #121
Title: Re: 032HF security access rejected Post by: giles92 on August 30, 2015, 05:13:34 AM worked like a charm. ;D
Title: Re: 032HF security access rejected Post by: scoot1043 on September 02, 2015, 12:01:27 PM Pin 121 is that on the loom connector?
Title: Re: 032HF security access rejected Post by: fknbrkn on September 02, 2015, 02:28:08 PM yep
|