|
Title: hello need some help with audi b6 1.8T AVJ 110kw 8E0906018B Post by: alutzu2000 on September 02, 2015, 12:17:35 PM hello , please help me with some advice , after i flashed my ecu (audi b6 1.8T AVJ 110kw 8E0906018B) with a moded file maybe was a noncompatible file or for different type of engine (i drove the car and was acting pretty good in agressive driving style wast good driving in normal condition ) with nefmoto flash i get 2 faults on engine controler via
Vag-com 311.2-N :18014 -rough road/engine torque signal from ABS : electrical malfunction p16606 - 35-00 18020 Engine control module incorectly coded p1612 - 35-00 so i decided to flash again my ECU with my original file i have backed up before flashing and now i get the same errors and my ESP/ABS and brake lights are on in dashboard , i got no abs or esp working i enter with vag-com 311.2-N in ABS/ESP controller and i get 3 more errors: 18256 please check dtc memory of engine controller p1848 35-00 01044 control module incorectly coded 00778 steering angle g85 66-10 not matched -intermitent please help me fix this ESP/ABS problems with my vag-com 311.2-N because this one i got registered after i bought the cable from ebay or give me some solutions to fix it . Thank you Title: Re: hello need some help with audi b6 1.8T AVJ 110kw 8E0906018B Post by: aef on September 02, 2015, 11:25:33 PM Are you sure your second attempt to turn your ecu back to stock was successful?
Have you deleted your faults with vagcom? Title: Re: hello need some help with audi b6 1.8T AVJ 110kw 8E0906018B Post by: alutzu2000 on September 03, 2015, 09:28:25 AM hello! yes was a successfull flash cuz was 2nd atempt 1st failed and card didnt want to start anymore then i reflashed and worked , i deleted faults but the ones im asking about canot be deleted .thank you
Title: Re: hello need some help with audi b6 1.8T AVJ 110kw 8E0906018B-*fixed* Post by: alutzu2000 on September 12, 2015, 05:58:10 AM hello all ! i manage to fix this issue , i had to recode the engine with vag-com beacose the engine soft coding and workshop codding went to 0000 so i used my old codes and for abs/esp i generated the soft code from the vag manual ussing the sticker in the trunk and after that i calibrated the esp with the login code 40168 , all works fine now no errors !
Title: Re: hello need some help with audi b6 1.8T AVJ 110kw 8E0906018B Post by: adam- on September 14, 2015, 03:27:35 AM Thanks for completing this, it might help someone later! :)
|