|
Title: for those who want to convert temperatures from celsius to fahrenheit Post by: vwnut8392 on September 03, 2015, 11:15:10 AM not sure if this is the right area to post this but i found a pretty simple way to convert the temperatures in the tuner pro XDF's from celsius to fahrenheit. it seems to be working perfectly for me so if you dont like having all your temps in celsius than give this a go. all you have to do is change the equation a for each map you want to show in fahrenheit.
for example im using the equation from TMOTNMX original temp shown 80 degrees C the original conversion equation 0.750000 * X+ -48.000000 the new conversion to make the temperature show in F (0.750000 * X+ -48.000000)*1.8+32 so all you have to do is put the original equation in brackets and than multiply by 1.8 and add 32. putting the original equation in brackets makes tuner pro do the math to convert the raw hex to C than after it does that it does the math afterward to make it into F. (original C equation here)*1.8+32 Well i hope this helps some people, just trying to contribute in any little way i can to the cause. Title: Re: for those who want to convert temperatures from celsius to fahrenheit Post by: vwaudiguy on September 03, 2015, 12:35:23 PM Very nice. Thanks
Title: Re: for those who want to convert temperatures from celsius to fahrenheit Post by: SB_GLI on September 03, 2015, 05:24:29 PM you can add this as an expression into VME7L if you want to show your logged values in Fahrenheit too! Or just use Celsius, cause it's better. :)
|