NefMoto

ECU Files => ECU Definition Files => Topic started by: Jim_Coupe on September 11, 2015, 03:00:30 AM



Title: Looking for Def to 4B0906018AL (ANB 2000 1.8T)
Post by: Jim_Coupe on September 11, 2015, 03:00:30 AM
Hi, Ive be trying hard to find a def for my ECU.. I have found some def´s that are almost similar but i need to find my ESKONF in my file. and when i compare other similar files i dont even find the LAMFAW table..

Help is apriciated


Title: Re: Looking for Def to 4B0906018AL (ANB 2000 1.8T)
Post by: ddillenger on September 11, 2015, 08:02:41 AM
0x15183

Right above KFKHFM, where it always is.


Title: Re: Looking for Def to 4B0906018AL (ANB 2000 1.8T)
Post by: kluczykpl on April 02, 2017, 03:04:10 AM
Hello, does anyone have an xdf file for this ECU?




Title: Re: Looking for Def to 4B0906018AL (ANB 2000 1.8T)
Post by: eLKa on April 09, 2017, 12:44:37 PM
I have found on this forum XDF file from very similar ecu
0261206449 4B0906018AA. Maps are the same like in  0261206450 4B0906018AL. Sorry for my english.


Title: Re: Looking for Def to 4B0906018AL (ANB 2000 1.8T)
Post by: TijnCU on April 10, 2017, 03:55:16 AM
Oops, responded to OP without reading...
nevermind :)


Title: Re: Looking for Def to 4B0906018AL (ANB 2000 1.8T)
Post by: eLKa on April 10, 2017, 07:47:14 AM
Oops, responded to OP without reading...
nevermind :)
Next time i will post the link... sorry.


Title: Re: Looking for Def to 4B0906018AL (ANB 2000 1.8T)
Post by: mophk on July 04, 2020, 03:44:30 PM
hey guys, ive been trying to mod this file to remove sai (eskonf, cwkonabg, mslbas, mslub, cdsls), rear o2 sensor (eskonf, cdhsh, CDHSHE and so on).

I was not able to find cwkonabg, mslbas, cdsls, cdhsh/e. the data structure seems different for the codewords, hell even the eskonf is weird (FF FF 00 30 FF F8 33) compared to other 1.8t i saw.

is there any guide how to find the codewords if the comparing does not work?
I tried to remove the rear o2 just with eskonf but it did not work for some reason, getting p1118 still. the modded eskonf is FF FF 00 F0 FC FB 63. f0 as per the binary and guide, FC tried to turn on the MIL as its not showing on the dash even when it should (dash lamp works with a instrument tests), fb sai , 63 to sai again, but now that i look at it the last one should be 3F

either way, any guide for the codewords?