|
Title: me3.8 immo 24c02 not your usual question Post by: dik-van-dub on September 15, 2015, 04:34:25 PM ok came across this on, post 11, thread http://nefariousmotorsports.com/forum/index.php?topic=3143.0
i believe w pin is pin 7 and + pin is pin 8, is this correct? if so do i just bridge pin 7 and 8 on the leads for my test clip? Title: Re: me3.8 immo 24c02 not your usual question Post by: eliotroyano on September 15, 2015, 05:54:20 PM SPI 24Cxx eeproms are very tricky to work with in circuit. Best bet is to take it out from circuit and read it.
Anyway here some info about it --> http://www.arlabs.com/incircuit.html (http://www.arlabs.com/incircuit.html) Also here is a pic attached with info about 24Cxx's WP pin. |