|
Title: AUDI A4 B6 AUTOMATIC TO MANUAL SWAP PROBLEM Post by: Blaack on October 05, 2015, 01:12:37 PM Hello, firstly i'm sorry for my english! ;)
So, i swaped automatic transimission to manual in AUDI A4 2.5 TDI AKE 180PS(ECU BOSCH:8E0 907 401D), I'm recoding ecu and abs/esp for manual transmission, when im start the engine, i saw smoke, and safe mode, the engine acceleration max to 2500rpm, so i decided to flashing map from manual ecu, but engine behavaes similary to automatic map, I think problem is coding/map for vp44, Anyone can help? Title: Re: AUDI A4 B6 AUTOMATIC TO MANUAL SWAP PROBLEM Post by: bendzji on October 06, 2015, 01:21:26 PM There is a diffrent thickness of washer under the engine speed sensor in manual transmission - check it out in ETKA - this could be the problem
Title: Re: AUDI A4 B6 AUTOMATIC TO MANUAL SWAP PROBLEM Post by: Blaack on October 07, 2015, 12:15:06 AM There is a diffrent thickness of washer under the engine speed sensor in manual transmission - check it out in ETKA - this could be the problem sensor and pad is from manual transmission, i dont know, maybe is wiring diagram of sensor i different? |