NefMoto

Technical => Flashing and Chipping => Topic started by: veedabowlu on October 07, 2015, 09:30:13 AM



Title: VW mk4 auto to manual swap
Post by: veedabowlu on October 07, 2015, 09:30:13 AM
I just finished converting a 2003 VW jetta 1.8t from a failed tiptronic to a manual 5 speed.  Can someone help me convert this automatic ECU file to become a manual transmission ECU file.  I do know on the earlier cars it was as easy as recoding the ECU to manual gearbox.  But this ECU will not accept manual gearbox coding... please help. 

Not shy of the wrench, but new to this file stuff.


Title: Re: VW mk4 auto to manual swap
Post by: elRey on October 07, 2015, 10:08:35 AM
Why not flash over it with a manual LP file? Is the LQ tuned?


Title: Re: VW mk4 auto to manual swap
Post by: veedabowlu on October 07, 2015, 10:10:44 AM
No the file is not tuned...I didn't want to mess up the immobilizer, etc... I don't have a file to flash it to...


Title: Re: VW mk4 auto to manual swap
Post by: veedabowlu on October 07, 2015, 10:27:40 AM
Do you have a file that I can flash to this without messing up the immobilizer, VIN, etc...


Title: Re: VW mk4 auto to manual swap
Post by: k0mpresd on October 07, 2015, 10:58:41 AM
reflashing only the flash will not affect the immo at all. only if you touch the 95040 chip.


Title: Re: VW mk4 auto to manual swap
Post by: veedabowlu on October 07, 2015, 11:00:52 AM
OK... great do you have I file that I can flash onto this ECU, that will turn it into a manual transmission ECU?


Title: Re: VW mk4 auto to manual swap
Post by: veedabowlu on October 07, 2015, 11:24:49 AM
I found one...flashed without any trouble so far... as soon as the weather lets up, I will go for a drive.