|
Title: me7logger problem Post by: andreqn on October 25, 2015, 07:27:13 AM i made all steps for installing me7l http://www.audizine.com/forum/showthread.php/479416-****-Complete-Guide-on-How-to-Take-and-Graph-Logs-****
when i try conenct to ecu have problem when the ignition is off - the program is connect ?????i can`t understand whats heppening please help Title: Re: me7logger problem Post by: nyet on October 25, 2015, 12:13:32 PM 1) Please use cut and paste from the cmd window, don't take a freaking picture of the screen.
2) the first error is a driver problem. 3) the second is either the ECU isn't powered up, there is something interfering on the k line (such as the cluster), or the baudrate is too high. Title: Re: me7logger problem Post by: andreqn on October 25, 2015, 10:22:36 PM 1) Please use cut and paste from the cmd window, don't take a freaking picture of the screen. i`ll try again tomorrow2) the first error is a driver problem. 3) the second is either the ECU isn't powered up, there is something interfering on the k line (such as the cluster), or the baudrate is too high. thanks Title: Re: me7logger problem Post by: adam- on October 26, 2015, 01:02:53 AM Are you using the right port? I mean, is your cable actually port 2, or have you just blindly inserted numbers?
Title: Re: me7logger problem Post by: andreqn on October 26, 2015, 11:05:03 AM Are you using the right port? I mean, is your cable actually port 2, or have you just blindly inserted numbers? in properties control panel for com port for the cable i use com 2 , in me7loger i use com 2 . is it right or there is another settings ....?Title: Re: me7logger problem Post by: andreqn on October 26, 2015, 11:22:04 AM when the ignition is off the cable conect to ecu , i atache i file wich is made when ignition is off , when is on disconect
Title: Re: me7logger problem Post by: SB_GLI on October 26, 2015, 11:28:45 AM start the car, pull the cluster fuse, attempt to log. Seems like you have some sort of interference going on that is causing failure.
Title: Re: me7logger problem Post by: jimmcgee5 on October 29, 2015, 11:11:47 AM one thing I noticed with my laptop , I could not connect it to the power in the car , IE , inverter or 12v pc power inverter , it caused too many com errors, ran it on its own battery and it was fine .
Title: Re: me7logger problem Post by: lkomnino on March 21, 2019, 07:16:56 AM having issues on my A6 C5 too. Cant communicate with ecu, tried pulling fuse for instrument cluster (number 15, 10a) but lights on cluster still on, and no connection to ecu.
Have tried different usb ports, nothing taken nyet's advice: "Use VisualME7Logger instead" Title: Re: me7logger problem Post by: speed69 on April 21, 2019, 03:31:06 PM I'mm with the same problem, only connect with ecu off.
once I turn on ignition the connection fails at the exact same time, getting error code -8. this happens using visualME7logger or ME7_Gui. Do anyone already figured out how to solve this? ps: in nefmoto logger it works fine while igntion is on, had some troubles but worked Title: Re: me7logger problem Post by: Blazius on April 21, 2019, 05:47:44 PM Set connection mode to 0x00 in the .ecu file, set samples / s to 50 in the config file and pull the instrument fuse. Start connecting when ignition on, then start car. Should work.
Title: Re: me7logger problem Post by: speed69 on April 22, 2019, 06:46:29 AM Set connection mode to 0x00 in the .ecu file, set samples / s to 50 in the config file and pull the instrument fuse. Start connecting when ignition on, then start car. Should work. Thanks, ill try this asapTitle: Re: me7logger problem Post by: speed69 on April 22, 2019, 02:28:09 PM Set connection mode to 0x00 in the .ecu file, set samples / s to 50 in the config file and pull the instrument fuse. Start connecting when ignition on, then start car. Should work. Thanks a lot! It worked like a charm!!awesome logger and ecuxplot! Title: Re: me7logger problem Post by: Blazius on April 23, 2019, 02:48:05 AM Thanks a lot! It worked like a charm!! awesome logger and ecuxplot! Nice, you are welcome. |