|
Title: requested lambda doesn't follow lamfa Post by: Giannis on August 20, 2011, 01:50:54 AM Hello to all i was experimenting in my mafless tune and i while i was doing some logs last night i noticed that requested lambda doesn'n follow lamfa in part throtle conditions but only in WOT. Has anyone any ideas what is happening?
Title: Re: requested lambda doesn't follow lamfa Post by: judeisnotobscure on August 20, 2011, 02:23:52 AM I just double checked the FR and LAMFA is for full load enrichment "when the driver calls for maximum torque over mrfa_w." pg 1025
Title: Re: requested lambda doesn't follow lamfa Post by: Giannis on August 20, 2011, 04:30:51 AM yes you are right but i think that one axis of lamfa if torque request from KFPED and the other axis is RPM it has no meaning if LAMFA was only for WOT fuelling to has other axis for torque. Correct me if i am wrong. I am trying to enrich my fuel in high load but not WOT conditions. Is there any other way?
Title: Re: requested lambda doesn't follow lamfa Post by: judeisnotobscure on August 23, 2011, 10:23:24 PM The bts maps work, not sure about mafless though.
Kflbts Is the ticket. I'll have to check the fr to see what other inputs affect bts. |