|
Title: Immobiliser Issues Post by: RelentlessDan on November 09, 2015, 03:21:45 PM Evening all
Right - you may have seen me mention on a couple of posts that I intend on flashing my friends .bin file onto my ECU. 1.8T BJX VW Polo 9N3 Aside from the checksum checks, is there anything else I need to be wary of? Will the immobiliser cause me any trouble, or is this not a problem? If I use another ECU, and swap this into my car, will I need to code out the immo then? Many Thanks Dan Title: Re: Immobiliser Issues Post by: adam- on November 10, 2015, 02:34:24 AM Right - you may have seen me mention on a couple of posts that I intend on flashing my friends .bin file onto my ECU. Don't. Aside from the checksum checks, is there anything else I need to be wary of? His file shouldn't need checksum'd if it's cosher. Verify with ME7Check Will the immobiliser cause me any trouble, or is this not a problem? It shouldn't be an issue, unless SW versions are different. If I use another ECU, and swap this into my car, will I need to code out the immo then? Adapt the immo with the car. Or clone the ECU and then you have two. Flashing maps unknowingly and cross-flashing is not good. Title: Re: Immobiliser Issues Post by: turboat on November 11, 2015, 03:49:03 PM Flashing maps unknowingly and cross-flashing is not good. Cross flashing is fine, provided you do your research first. |