|
Title: Combining to ECU EEPROM Files Post by: adam- on November 19, 2015, 12:02:13 PM I know there's Argdubs tool for combining an ECU EEPROM with a cluster EEPROM, but is there a way to combine two ECU EEPROMs?
I'm not really sure what data I need to swap; and where it's stored. I want to do it this way because I don't want to go out in the cold. Could probably just adapt the new ECU, but meh. Title: Re: Combining to ECU EEPROM Files Post by: _nameless on November 19, 2015, 01:33:59 PM Why not just read the existing EEPROM and write it to the new one? What exactly are you trying to accomplish?
Title: Re: Combining to ECU EEPROM Files Post by: adam- on November 19, 2015, 01:55:25 PM Basically, the ECU that was in the car is a DR. Has an HN file on it. I wrote the original DR file back to it and it bricked it, I've no idea why.
I didn't want to overwrite the HJ ECU with the DR EEPROM incase it bricked it and I'd have to do it again, so I'd rather just copy over the data that I need to from the DR into the HJ. But alas, I ventured into the cold and coded the ECU into the car, it took like a fish to water, no issues. I'd had previous problems coding clusters and keys, so thought the ECU would be the same stupid issue, but it wasn't. I suppose this could be deleted. Title: Re: Combining to ECU EEPROM Files Post by: vwaudiguy on November 19, 2015, 03:53:14 PM "Combining two ecu files" :P
Title: Re: Combining to ECU EEPROM Files Post by: adam- on November 20, 2015, 12:58:23 AM Sarry, must've typed too fast. :)
Title: Re: Combining to ECU EEPROM Files Post by: vwaudiguy on November 20, 2015, 10:02:24 AM Just bustin' yer chops.
Title: Re: Combining to ECU EEPROM Files Post by: SB_GLI on November 20, 2015, 03:54:53 PM Isn't DR immo2? That'd be why you bricked it.
Title: Re: Combining to ECU EEPROM Files Post by: _nameless on November 22, 2015, 05:00:02 AM It shouldn't have bricked anyway just code for "start blocked by immobilizer" and "incorrect eeprom" or something like that
|