|
Title: Vag K+Can commander cable Post by: Dave9n3 on November 19, 2015, 12:43:08 PM Hi,
Hopefully a quick question for someone in the know. Is a normal kkl ftdi chip cable suitable for using Vag commander 5.5 or do i need a specific cable. Thanks in advance Dave Title: Re: Vag K+Can commander cable Post by: adam- on November 19, 2015, 01:26:33 PM Use 2.5, 5.5 doesn't have k-line support so doesn't work.
Use vag EEPROM programmer V1.19 instead, it's got a much more reliable connection. Title: Re: Vag K+Can commander cable Post by: Dave9n3 on November 19, 2015, 02:48:50 PM Ah that's a shame haha! I had a look and it said kwp2000 as one of the options so thought it might work!
Thanks tho I'll check that out tomorrow and see if I can get it :) Title: Re: Vag K+Can commander cable Post by: adam- on November 20, 2015, 04:06:26 AM You can use commander 2.5 too.
Title: Re: Vag K+Can commander cable Post by: armageddon on November 20, 2015, 04:08:40 AM Can vag eeprom programmer read and write airbag controler?
Title: Re: Vag K+Can commander cable Post by: adam- on November 20, 2015, 05:26:50 AM Not sure anything can. Got a death code? I'm pretty sure it's easier to replace.
Title: Re: Vag K+Can commander cable Post by: hansdevogel89 on November 20, 2015, 10:26:30 AM Can vag eeprom programmer read and write airbag controler? carprog 7.28 clone can do some Title: Re: Vag K+Can commander cable Post by: armageddon on November 20, 2015, 11:15:33 AM I was told :) trying to find a cheaper solution
better to replace the dam controler |