|
Title: Help for antilag Post by: Tatan974 on November 26, 2015, 08:43:10 AM Hello, i want to active the antilag on an MK4 1.8T ecu 032DR but dont work :/
a identified : FTOMN => 1A2DA Antilag Call Fonction => 9BD2A Antilag Fonction => 9F7F6 SpeedThreshold => 17DB5 LaunchRPM => 17DB7 IgnitionCutDuration => 17DB9 RPMThreshold => 17DBB AccPedalThreshold => 17DBD I attach the ori + bin modified in pj anyone can chek if the mod is ok ? thanx :) Title: Re: Help for antilag Post by: Tatan974 on January 03, 2016, 12:45:48 PM Up....
Title: Re: Help for antilag Post by: adam- on January 03, 2016, 01:21:33 PM Do you have rods?
Title: Re: Help for antilag Post by: dream3R on January 03, 2016, 02:38:20 PM This isn't reverse engineering lol
Title: Re: Help for antilag Post by: Tatan974 on January 08, 2016, 08:40:11 PM This isn't reverse engineering lol Why ? I'm copy manually the value modified by the script If I patch my file with the script and write this file after correct the cks, the véhicule dos'nt start and the ecu dosn't wake up... I must write the ori in boot mod for restore it Title: Re: Help for antilag Post by: Tatan974 on January 08, 2016, 10:04:02 PM Here a screen of the script :
Title: Re: Help for antilag Post by: dream3R on January 08, 2016, 11:13:33 PM Here a screen of the script : LOL sorry no offence but LOL Title: Re: Help for antilag Post by: Tatan974 on January 08, 2016, 11:48:09 PM Why ?
Title: Re: Help for antilag Post by: dream3R on January 08, 2016, 11:58:56 PM https://en.wikipedia.org/wiki/Reverse_engineering
You are using a script so no reverse engineering personally. You could argue the fact that the script does it I guess. Title: Re: Help for antilag Post by: lepatron972 on January 09, 2016, 02:27:06 AM Why ? Tatan974, le mieux c'est de passer par IDA, décompiler le dumpTatan974, it would be best to go through IDA, decompile dump Title: Re: Help for antilag Post by: Tatan974 on January 10, 2016, 02:41:39 AM Merci lepatron j'avous que j'ai vraiment du mal avec l'anglais du coup il ce peut que j'ai pas trop compris certaine chose pour l'antilag...
Du coup je vais voir un peut du côté de IDA mais la dessus j''y connais rien :( Title: Re: Help for antilag Post by: adam- on January 10, 2016, 05:27:54 AM English please.
And I'll ask again, do you have rods? Title: Re: Help for antilag Post by: Tatan974 on January 10, 2016, 05:30:57 AM English please. And I'll ask again, do you have rods? what is rods ? Title: Re: Help for antilag Post by: IamwhoIam on January 10, 2016, 11:05:48 AM LOL
Title: Re: Help for antilag Post by: Tatan974 on January 10, 2016, 11:15:34 AM LOL I dont speak english so i don't know what is rods french Title: Re: Help for antilag Post by: dream3R on January 10, 2016, 11:21:13 AM https://en.wikipedia.org/wiki/Connecting_rod
Title: Re: Help for antilag Post by: Lost on January 10, 2016, 11:36:59 AM LOL
Title: Re: Help for antilag Post by: ddillenger on January 10, 2016, 12:47:37 PM These are (or is it were?) rods.
Title: Re: Help for antilag Post by: vwaudiguy on January 10, 2016, 02:56:13 PM I've only seen rods like that when an engine sucked up water. I hope that's not from teh anti-lag.
Title: Re: Help for antilag Post by: Tatan974 on January 10, 2016, 07:36:57 PM The car have a stock rods
Title: Re: Help for antilag Post by: vwaudiguy on January 10, 2016, 10:38:23 PM So basically I can use anti-lag to lower my compression? I need to post this in the turbo-vr forum! Not to mention the added "cushioning" effect from the rod being sprung rather than stiff. It now absorbs detonation much more efficiently.
Title: Re: Help for antilag Post by: adam- on January 11, 2016, 01:11:36 AM The car have a stock rods You do not require anti-lag then. You will have banana rods if you do. Title: Re: Help for antilag Post by: spacey3 on January 11, 2016, 02:23:21 AM I had a Revo map do that to my rods first time around, boost spikes ftw! :)
Title: Re: Help for antilag Post by: Tatan974 on January 13, 2016, 09:18:05 AM I'm open my file with ida and apply the plugins bosh. In the screen is the call fonction ?
I'm very novice in ida... The file modification is done in IDA ? Title: Re: Help for antilag Post by: dream3R on January 15, 2016, 10:15:05 PM English please. And I'll ask again, do you have rods? he's on about IDA and having zero knlowlege Title: Re: Help for antilag Post by: dream3R on January 15, 2016, 10:17:05 PM a Ford tuner near me snapped a Fordged conrod at 950 bhp lol silly
Title: Re: Help for antilag Post by: ddillenger on January 15, 2016, 10:17:58 PM I was once at a rest area on a public toilet when another patron brushed his leg against mine under the divider. I believe this is some sort of signal to initiate a homosexual encounter.
This thread surpasses that in terms of gay. Title: Re: Help for antilag Post by: dream3R on January 15, 2016, 10:20:38 PM I'm open my file with ida and apply the plugins bosh. In the screen is the call fonction ? I'm very novice in ida... The file modification is done in IDA ? iike I said in the pm andy plugin is shit - plugin andy est de la merde Title: Re: Help for antilag Post by: Mechsoldier on November 11, 2016, 09:41:44 PM back from the dead....lol...So, how many times have you actually personally seen the rods do that? I've installed it on a ton of cars, I've had it on my sisters car for 15k miles, antilag barely ever used, a couple times a month, and I've never seen that happen so far...
I'd assume this is these kids you see trying to take videos of them lighting cigarettes or fires with their exhaust? I've never once even seen somebody blow a turbo being a respectable adult with the antilag. |