|
Title: ECU defect without a reson? Post by: black on November 28, 2015, 06:56:45 AM I have an 2,7T ECU with sucking 0,75 ampere when powered up and 2,5A when starting in boot mode??
How can this happen from then to now?? Normal is 0,25A No connection possible... ??? The ecu was runnig fine... just disconnected it from car... best regards Title: Re: ECU defect without a reson? Post by: crackerx on December 22, 2015, 02:30:42 AM shure you do correct connection? i think you brick the ecu during incorrect connection
Title: Re: ECU defect without a reson? Post by: black on January 04, 2016, 08:52:30 AM shure you do correct connection? i think you brick the ecu during incorrect connection I have a lot of 2.7 ECUS on my table and all of them are working fine with my bench cable :( Title: Re: ECU defect without a reson? Post by: ddillenger on January 04, 2016, 11:49:41 AM That is not normal power consumption, but you know that. Sounds bad.
Title: Re: ECU defect without a reson? Post by: black on January 05, 2016, 02:25:12 AM That is not normal power consumption, but you know that. Sounds bad. yes... ECU is discarded now... |