NefMoto

Noob Zone => Noob Questions => Topic started by: munro on December 03, 2015, 11:33:54 AM



Title: questions rookies
Post by: munro on December 03, 2015, 11:33:54 AM
guys I know that the question is very silly for all of you on this forum but there is a damos / A2L file for 8D0907551M?
  I was a little incercadi this forum but did not succeed ...
other small curiosity do you mean what you write unmount the file?
one more stupid question motronic me7 there is a limit for diagnostic readings maf?


Title: Re: questions rookies
Post by: nyet on December 03, 2015, 12:09:08 PM
guys I know that the question is very silly for all of you on this forum but there is a damos / A2L file for 8D0907551M?
No but there are xdf/kps

http://files.s4wiki.com/defs/

Quote
I was a little incercadi this forum but did not succeed ...

I have no idea what this means

Quote
other small curiosity do you mean what you write unmount the file?

I have no idea what this means

Quote
one more stupid question motronic me7 there is a limit for diagnostic readings maf?

I have no idea what this means.

There are DTCs that are triggered if the MAF goes over a certain reading, yes.

There are several maps that govern those limits.


Title: Re: questions rookies
Post by: munro on December 03, 2015, 09:40:42 PM

 
thanks for your answers Nyet unfortunately I use the translator of google, and then a few posts may not be understandable
I apologize for that but my English is very bad most of google translator ...
however you can indicate some discussion where we talk about the diagnostic limitations maf in me7?
for the link attached to your response thank but I do not know to use tunerpro and then not know how to use a file xdf ..
kps for files I've downloaded something but I thought there was a damos / A2L dedicated to ECU 8d0907551m which I think is much more complete than any file kp also sefatto tuner from professionals like you ...
there is a beginner's guide to using tunerpro on the forum?
also wondered infos about many readings I've done on the forum where we talk to disassemble files motronic as I understand it ...
What is meant by that?


Title: Re: questions rookies
Post by: munro on December 04, 2015, 03:50:22 AM
there are xdf/kps
because I can not download files xdf?


Title: Re: questions rookies
Post by: adam- on December 04, 2015, 04:16:05 AM
Why can't you?


Title: Re: questions rookies
Post by: munro on December 04, 2015, 11:04:08 AM
ok I was able to download some xdf ...
But I would like to ask about some xdf also on site tunerpro clicking on it opens a page full of numbers and symbols What should I do with that stuff?


Title: Re: questions rookies
Post by: adam- on December 04, 2015, 12:08:54 PM
Find an XDF that matches YOUR bin.  Not anyone elses.

Open the bin in TunerPro, open the XDF.  There's your maps, etc.  If you want more, define more.  There is not a completely defined XDF for every bin.