|
Title: M3.8 630cc injectors - KRKTE and TVUB question Post by: phil_84 on December 10, 2015, 03:51:26 PM Hi,
Does anyone have a good start on this setup? 630cc bosch injectors GT30 turbo 4" inlet 3" turbo back exhaust FMIC Been a 12 month build, and because its an ecu in and out job I just wondered if anyone has a good base to start from, I dont mind paying Thanks Title: Re: M3.8 630cc injectors - KRKTE and TVUB question Post by: vwaudiguy on December 10, 2015, 07:56:26 PM Does anyone have a good start on this setup? I don't think upgrading to ME7 would be a bad idea. Title: Re: M3.8 630cc injectors - KRKTE and TVUB question Post by: RBPE on December 11, 2015, 09:27:25 AM Full 12vt ecu file to learn off in the def files, not sure if 630's as I only used it to check structure/factors and do more 711, speaking of which - ME711 & 3.8 map info I have put some up here in the tuning area a few threads down to get to know the ecu's.
Dead times for VR6/R32 turbo in's attached Title: Re: M3.8 630cc injectors - KRKTE and TVUB question Post by: RBPE on December 11, 2015, 09:30:35 AM Noticed this was an early one that didn't have the Siemens ones on - 14v
http://fuelperformance.co.uk/index.php?route=product/product&path=367_738&product_id=5287 Title: Re: M3.8 630cc injectors - KRKTE and TVUB question Post by: phil_84 on December 12, 2015, 02:06:11 AM That's brilliant thanks :)
I have now got the trims down to 2 and have a nice steady idle Will be working on load and timing today should be able to post some results later on, Thanks for the help guys |