|
Title: Golf immo off but dash blink Post by: andreqn on December 10, 2015, 11:28:13 PM Hi mates ,
I have ecu swap and immo off ME7, engine run ok , but dash key icon blink, is there a salution for this proble VW GOLF 2000 Title: Re: Golf immo off but dash blink Post by: ddillenger on December 11, 2015, 01:42:13 AM Desolder the LED, or match the key to the cluster, THEN turn the immobilizer off.
Title: Re: Golf immo off but dash blink Post by: vwaudiguy on December 11, 2015, 06:05:51 PM Hi mates , I have ecu swap and immo off ME7, engine run ok , but dash key icon blink, is there a salution for this proble VW GOLF 2000 I've heard this issue is sometimes caused by cold solder joints on the instrument cluster board. Instrument cluster isn't seeing the key. Worth looking into. Title: Re: Golf immo off but dash blink Post by: slklite on December 12, 2015, 12:17:24 PM Hello, desolder the led ...
I heard, that you might be able to code out the fault code from the cluster, I don't know how though ... Hope this helps ;) |