|
Title: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on December 16, 2015, 10:53:52 AM just wondering which chip to desolder and swap to get immo transfer to spare ecu so it can start. all help appreciated.
Title: Re: 2007 passat 2.0T med9.1 immo Post by: k0mpresd on December 16, 2015, 11:43:56 AM doesnt exactly work like that.
Title: Re: 2007 passat 2.0T med9.1 immo Post by: ddillenger on December 16, 2015, 03:22:12 PM just wondering which chip to desolder and swap to get immo transfer to spare ecu so it can start. all help appreciated. It's an encrypted eeprom that must be used with the matching flash. Swapping it won't work. Title: Re: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on December 16, 2015, 03:37:51 PM so swap both then
Title: Re: 2007 passat 2.0T med9.1 immo Post by: ddillenger on December 16, 2015, 03:41:38 PM You are going to swap the bga processor?
Title: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on December 16, 2015, 03:43:46 PM (http://images.tapatalk-cdn.com/15/12/16/5a4010818062fb034fa0e43bfff5dd4e.jpg)
As you can see its corroded from water damage bottom right and i got a used good ecu so id like to ideally swap what is needed. Title: Re: 2007 passat 2.0T med9.1 immo Post by: k0mpresd on December 16, 2015, 03:53:27 PM bdm read or immo off on new ecu.
Title: Re: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on December 16, 2015, 03:57:07 PM why not just pure desolder/solder... not shy from a tricky task and bdm100 is not available atm... on loan
Title: Re: 2007 passat 2.0T med9.1 immo Post by: ddillenger on December 16, 2015, 05:22:11 PM Because the flash is internal to the processor and it's BGA. I can't think of ANY file that would be worth the aggravation of doing that.
Title: Re: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on December 16, 2015, 05:31:35 PM anyone want to identify the immo chip for me. and its not about the file rather just getting ecu going without bdm tools
Title: Re: 2007 passat 2.0T med9.1 immo Post by: vwaudiguy on December 16, 2015, 06:01:34 PM It's an encrypted eeprom that must be used with the matching flash. Swapping it won't work. Did you miss this? Title: Re: 2007 passat 2.0T med9.1 immo Post by: ddillenger on December 16, 2015, 06:14:01 PM anyone want to identify the immo chip for me. and its not about the file rather just getting ecu going without bdm tools 95160 IIRC. Title: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on December 16, 2015, 06:25:53 PM thx!
-edit- better safe then sorry, friend came by with stand and bdmtool. Time to clone this sucker! Title: Re: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on January 06, 2016, 09:07:38 PM anyone got the skills to immo off ecu for me? Unfortunately old eccu config fault did not allow bdm read :(
i have flash http://s000.tinyupload.com/index.php?file_id=03081146971635485519 eeprom http://s000.tinyupload.com/index.php?file_id=00861658408917937117 Title: Re: 2007 passat 2.0T med9.1 immo Post by: ddillenger on January 06, 2016, 09:10:22 PM attached.
Title: Re: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on January 07, 2016, 01:13:04 AM Does the flash not have to be modified aswell?
Title: Re: 2007 passat 2.0T med9.1 immo Post by: ddillenger on January 07, 2016, 08:31:40 AM If it did, I'd have posted it :P
Title: Re: 2007 passat 2.0T med9.1 immo Post by: gman86 on January 07, 2016, 08:46:40 AM If it did, I'd have posted it :P ;D powTitle: Re: 2007 passat 2.0T med9.1 immo Post by: mkxGTi on January 07, 2016, 12:41:46 PM I should listen, not speak ;) thx!
Title: Re: 2007 passat 2.0T med9.1 immo Post by: ddillenger on January 07, 2016, 01:22:05 PM |