|
Title: ECU reading - "Flash checksum does not match, trying to read flash again" Post by: andrade_br on December 20, 2015, 07:00:56 PM Hi,
Reading a ME 7.5 (A3 180 APP engine, checksum disabled ecu, tuned file), the msg above always comes up after 50% of reading. After 3 times, it says "flash checksum still does not match after 3 attempts, giving up and skiping". Does it means that the content was disregarded when skipped or just not "validated" ? From 50% on, every block read goes through the 3 attempts. Tried: 29F800/29F800BB/29F800/BT layouts - stills the same All possible baud rates - stills the same Should I let it go all the way til the end and I would be ok with that pulled out ".bin" ? Tks Title: Re: ECU reading - "Flash checksum does not match, trying to read flash again" Post by: ddillenger on December 20, 2015, 10:29:51 PM Hi, Reading a ME 7.5 (A3 180 APP engine, checksum disabled ecu, tuned file), the msg above always comes up after 50% of reading. After 3 times, it says "flash checksum still does not match after 3 attempts, giving up and skiping". Does it means that the content was disregarded when skipped or just not "validated" ? From 50% on, every block read goes through the 3 attempts. Tried: 29F800/29F800BB/29F800/BT layouts - stills the same All possible baud rates - stills the same Should I let it go all the way til the end and I would be ok with that pulled out ".bin" ? Tks 1. You didn't post your ecu number. 2. You are using an old beta of nefmoto, not the current release. Fix that. Title: Re: ECU reading - "Flash checksum does not match, trying to read flash again" Post by: andrade_br on December 21, 2015, 01:53:16 AM ECU 06A906023S
I was in fact using a older nefmoto version. I didn't realize that the link at Wiki was not calling for the latest release. Downloaded 1.9.3.2. and will try again. Tks Title: Re: ECU reading - "Flash checksum does not match, trying to read flash again" Post by: overspeed on December 21, 2015, 10:13:07 AM Your ECU use an 29F400BB memory
|