NefMoto

ECU Files => ECU Definition Files => Topic started by: phil_84 on December 25, 2015, 10:28:57 AM

Title: 06A906032HJ - kp to XDF
Post by: phil_84 on December 25, 2015, 10:28:57 AM

Hi Guys,

I have just started looking at Tuner pro as I am moving to the moates hardware for emulation,

I Have a huge pack of KP files - also the ability to change them to english using winols software (ori)

I am after XDF files for Med9.1 and also the above file if possible?

I have attached the .kp file for the xdf im after on the me7.5 platform if anyone can change it to xdf or even has one already?

Thanks

Phil

Title: Re: 06A906032HJ - kp to XDF
Post by: nyet on December 25, 2015, 02:51:34 PM

ecuxplot comes with a converter

Title: Re: 06A906032HJ - kp to XDF
Post by: phil_84 on December 26, 2015, 09:15:05 AM

Hi Nyet,

Thanks for the reply, Is there any instructions on how to use the converter?

I would be happy to post XDF files I can create from the KP files I have if I knew how to use the converter?

Many thanks

Phil

Title: Re: 06A906032HJ - kp to XDF
Post by: nyet on December 26, 2015, 12:38:48 PM

Code:

Usage: mapdump [options] maps.kp [outputfile]
Options:
 -d                   Generate raw dump
 -i <image.bin>       Generate min/max columns and image size based on this
                      image
 -o                   Generate old xdf (requires -i <image.bin>)
 -r <maps.kp [...]>   Annotate with descriptions from matching maps also in
                      these mappacks (ignored if -x is used)
 -x                   Generate xml xdf (requires -i <image.bin>)

Title: Re: 06A906032HJ - kp to XDF
Post by: phil_84 on December 26, 2015, 12:47:44 PM

Hi Nyet,

Yeah I managed to get that far, but every combination I get an error for..

Im not that clued up on cmd prompts, As I dont usually need them.

Is there a walkthru for this?

Title: Re: 06A906032HJ - kp to XDF
Post by: phil_84 on December 26, 2015, 02:58:46 PM

Ah figured it out

File attached ;D